Metal mass detectors and barrier sensors

  • EVOLOOP

    EVOLOOP

    Read more

    Induction loops & photocells replacement for automatic barriers

    Evoloop is an activation and presence detector for automatic barriers, with integrated microwave technology MoWa based on FMCW principles. It is s the alternative to induction loops and photocells and it detects motion and static presence. Thanks to the 140° field of view, you can configure up to 3 virtual loops independently to fit your application. The loops can be positioned where you desired within this range. For each loop you can decide whether it should function as a presence loop or as a protection loop. The Evoloop detector is particularly resistant in all environments and conditions, including challenging weather like fog, heavy rain, frost or snow. I plus di Evoloop: PLUG&GO Niente più lavori stradali polverosi con attrezzature pesanti e rumorose. Basta montare il sensore, collegarlo e avviare l’autoapprendimento. Pronto all’uso! APP MOBILE Via mobile app, start a simple teach-in and setup 2 preconfigured loops in no time. If needed, configure up to 3 virtual loops independently to fit the application’s needs. Choose the loop type, target type and add a sense of direction to filter out cross-traffic. MAXIMUM VERSATILITY The Evoloop adapts to all applications. Whether you need to setup a paid parking system or need protection against collision with the boom, the EVOLOOP has it covered. It can be installed on all types of barriers, even with skirt or hinged support. IN ANY WEATHER CONDITION The Evoloop can be installed in any weather all year round. The virtual loops are reliable and resistant in all environments and conditions, including challenging weather like fog, heavy rain, frost or snow. Technical specifications: Technology: FMCW, MoWa inside (60GHz microwave) Mounting height: 30 cm to 70 cm Maximum detection distance: maximum  7m Detection types: presence, protection Radar field of view: 140° opening field and 40° elevation Antenna angle adjustment: from -20° to +20° (without accessory) Power supply: 12 - 30V DC +/-10% - 12-24V AC +/-10% Output: 2 electronic relays (galvanic isolation - no polarity) > Maximum switching voltage: 35 V DC/ 24 V AC > Maximum current switchable: 80 mA (resistive) Power consumption: < 3 W Led: 3 RGB LEDs and 1 white LED for Bluetooth® Bluetooth®: operating bandwidth: 2402 MHz - 2480 MHz Material/ Colour: PC/ ASA/ Aluminium ADC12 - black Cable length: 3 m (standard) Dimensions: 50 mm x 150 mm x 68 mm Protection degree: IP65 (IEC/EN 60529) Operating temperature: -25°C to +55°C** ; 0-95% relative humidity, non-condensing Standards: EN 12453 (type D) -Datasheet -Instruction Manual  
  • LOOP

    LOOP

    Read more

    Cabled loop

    Magnetic cabled loops to be used with metal detectors.   They are available in  2 versions: -2x1 mt -3x2 mt Instructions
  • LZR-H100

    LZR-H100

    Read more

    Security laser barrier detector

    LZR-H100 detector oers a real alternative to magnetic loops: less time required for installation, detection of all types of vehicles and greater adaptability. The laser sensor for automatic barriers is used to open, protect and/or detect a presence. It oers great flexibility in defining the width and depth of the detection zones. Comfortable opening Detection of all types of vehicles: cars, electric vehicles, vehicles made of composite materials, trucks with trailers, etc. Detection of vehicle trajectory: approaching or moving away. User safety LZR-H100 protects vehicles and people within the safety field from contact with the barrier (installation with reference point).
    Pedestrian & parallel traffc filter The barrier only opens when a vehicle is approaching. Pedestrians and parallel traffc in the opening field are screened. Easy installation Product installation without any impact on the surrounding environment, with simple delimitation of the detection fields independently from one another, by walking in front of the sensor.
    Technical features Technology: laser scanner, time-of-flight (ToF) measurement Maximum detection distance: 9.9 m × 9.9 m Emission specications: IR laser (CLASS 1) = wavelength 905 nm; max. pulse output power 0.10 mW Visible laser (CLASS 2) = wavelength 635 nm; max. CW output power 0.95 mW Power supply: 10-35 V DC on the detector side Input: 1 optocoupler (galvanic isolation - non-polarised) Output: 2 electronic relays (galvanic isolation - polarity-free) Maximum switching voltage: 35V DC / 24V AC Maximum switchable current: 80 mA (resistive) Power consumption: < 5 W Response times: Motion detection: typically 200 ms (adjustable); Presence detection: typically max. 20 ms; max. 80 ms Vibrations: < 2 G Material/Colour: PC/ASA/black Dimensions: 125 mm (W) × 93 mm (D) × 70 mm (H) (mounting bracket + 14 mm) Protection degree: IP65 Operating temperature: -30°C, +60°C under voltage / -10°C, +60°C without voltage Compliance: EMC 2014/30/EU; LVD 2014/35/EU; RoHS 2 2011/65/EU; MD 2006/42/EC EN 61000-6-2; EN 61000-6-3; EN 60950-1; EN 60825-1; EN 50581; EN ISO 13849-1 (Pl “d” CAT 2); EN 62061 (SIL 2); EN 61496-1 (Type 2); EN 12978; EN 12453 (Device E)
    Data Sheet Instructions Manual
  • rilevatori di masse metalliche monocanale barra DIN, 12/24V per collegamento a spire metalliche

    BASIC (MAGNETIX)

    Read more
    BASIC, single-channel 12-24V metal mass detector (DIN rail).
    The MAGNETIX line is a line of precision metal mass detectors for connection to magnetic coils to detect the presence of vehicles in a given area. The BASIC model is a single-channel 12-24V, DIN rack mounted detector. It has great sensitivity with continuous adjustment capability and external temperature compensation to ensure safe detection in case of long-term loop occupancy. Find out other metallic masses detector, BASIC-DGL, e le magnetic coils, LOOP 6 and LOOP 10  
  • rilevatori di masse metalliche bicanale barra DIN, 12/24V per collegamento a spire metalliche

    BASIC-DGL (MAGNETIX)

    Read more
    BASIC-DGL, dual-channel 12-24V metal mass detector (DIN rail)
    The MAGNETIX line is a line of precision metal mass detectors for connection to magnetic coils to detect the presence of vehicles in a given area. The BASIC-DGL model is a bichannel 12-24V, DIN bar mounted detector. It has great sensitivity with the possibility of continuous and different sensitivity adjustment, continuous presence setting for unlimited time, and external temperature compensation to ensure safe detection in case of long-term loop occupancy In addition to the technical specifications common to the BASIC model, the DGL version: - 10 sensitivity levels - logical operation selection (only loop 1/independent loops 1-2/with or without direction of travel detection) - display of the working frequency of each loop - loop frequency stability check function (useful for correct installation) - dynamic release function Find out other metal mass detectors, BASIC, and the magnetic coils, LOOP 6 and LOOP 10   Datasheet   User Manual  
Top