Radio products

universal radio products

Showing all 12 results

  • EGO KUBE

    Read more

    6-key/channel universal radio transmitter

    Universal 6-channel multi-frequency transmitter (433.92MHz to 868.35MHz). The same functions, the same ease of use and the same powerful software as the EGO PLUS in a particularly robust 6-key housing.
  • EGO PLUS

    Read more

    Universal 4-button/channel radio transmitter

    Universal 4-channel multi-frequency transmitter (433.92MHz to 868.35MHz). Manufactured entirely in Italy, it is capable of learning fixed codes and rolling codes. Each key can be independently programmed so that 4 different transmitters can be stored in a single device 4 different transmitters. It also has the ability to generate new unique codes that can be memorised on the receivers. Simplified copy: LEDs indicate how to complete the programming depending on the model of the remote control to be copied Ego Plus uses a 3V battery type CR2032.
  • INDUS RX

    Read more

    433,92 Mhz receiver for INDUS line

    The INDUS-RX receiver, small and discreet, is designed to be inserted into electrical panels. Its cover is translucent orange like the INDUS renote control. It has removable clamps for easy handling. Technical characteristics Power supply: 12-36Vac / dc Frequency: 433.92 MHz Remote controls storable: 500 max Output relays: n.2 signal relays max 1A Operating temperature -20°C, +55°C
  • INDUS6

    Read more

    Strong radio remote control for use in industrial settings

    The INDUS6 industrial radio remote control is the ideal solution for remote control needs in industrial environments. 6-key/channel frequency 433.92 Mhz Strong: body made of highly mechanically resistant material. Simple and intuitive: the icons, next to the leds, explain their functions. Suitable for industrial use: the ergonomics of INDUS and the size of the buttons, guarantees safe and comfortable use, even in the most difficult conditions. Tireless battery: the CR2450 battery guarantees three times as many activations compared to a classic CR2032 battery. Excellent radio range: thanks to the size of the internal antenna. Industrial design: simple, square lines,  functional for use with work gloves. Technical features Power supply: n.1 battery CR2450 Frequency: 433.92 MHz Operating temperature -20°C, +55°C  
  • EGO/EGO32

    Read more
    Universal 4-channel multi-frequency transmitter (from 433.92 MHz to 868,35MHz)
    Duplicating remotes has never been so easy!  
    A shell of new design, linear, light and intuitive contains a jewel of technology.
     
    The EGO transmitter is suitable to unify or replace all outproduction radio commands plus the ability to replace almost all the models currently trading.
    EGO is able to emulate a large part of the transmitters. The frequency spectrum reproduced in self-learning range from 433 MHz to 868 MHz (excluding quarzate frequencies ranging from 28.785 MHz to 40.600 MHz). In addition to the frequency, EGO is able to recognize the encoding type present in the original (if fixed code or rolling code) and replicate it precisely and constantly. You can store up to 4 transmitters with different frequencies and codes (one for each button). Discover the other universal products: EGO433 universal transmitter 433 MHz, COPY-MINI universal self-learning receiver (2 channels), COPY-ONE universal self-learning receiver (4 channels), EGO-KODE universal multi-frequency radio keypad. EGO APRIMATIC [video src="/wp-content/themes/responsive-child/video/ego-ego32/ego_aprimatic_generatore.mp4"]  
    EGO BENINCÀ [video src="/wp-content/themes/responsive-child/video/ego-ego32/ego_benincà_generatore.mp4"]
    EGO FAAC [video src="/wp-content/themes/responsive-child/video/ego-ego32/ego_faac.mp4"]
    EGO MITTO BFT [video src="/wp-content/themes/responsive-child/video/ego-ego32/ego_mitto_bft.mp4"]
    EGO MITTO BFT (SENZA TELECOMANDO ORIGINALE) [video src="/wp-content/themes/responsive-child/video/ego-ego32/ego_mitto_bft_senza_telecomando_originale.mp4"]
  • EGO433

    Read more
    4 Channels Transmitter with 433,92MHz frequency
    (keyless emulator of fixed and rolling codes – HCS standard)
     
    Self-learning 433,92 Mhz 4 channels transmitter. Produced entirely in Italy, EGO433 can duplicate fixed code and keyless HCS transmitters. Each channel can replicate a different transmitter and given a compatible receiver EGO433 is able to replace even a broken one thanks to its code-generator feature.
     
    Powered by a 3 V CR2032 battery, EGO433 signals the user before the battery is empty changing the behavior of flashing led during common usage.
     
    Furthermore EGO433 prevents accidental battery drains by stopping the transmission after 20 seconds of continuous pressing.
     
    Discover the other universal products: EGO universal multi-frequency transmitter COPY-MINI universal self-learning receiver (2 channels), COPY-ONE universal self-learning receiver (4 channels), EGO-KODE universal multi-frequency radio keypad.
       
  • trasmettitore SH4

    SH4

    Read more
    4-channel keypad wih 433,92MHz frequency SH line control units
    Self-learning, 4-channel keypad with 433,92 Mhz frequency. Entirely made in Italy, it transmits a HCS cod with AB techno key. The batteries are n.2 type CR2016, and the keypad informs the owner of its battery status by changing its blinking lights. Data Sheet
  • Tastiera radio universale multifrequenza EGO-KODE

    EGO-KODE

    Read more
    EGO-KODE: “Universal” multi-frequency radio keypad
     
    EGO-KODE is a multi-frequency universal radio keypad, compatible with any receiver you already have in your automation system. Without any wiring, it allows you to open your gateway with a simple PIN code. EGO-KODE is user-friendly, safe and accessible: you will be able to get in easily and freely without a key.
     
    EGO-KODE can be battery-powered or by using the two cables that were previously needed for your old key-switch.
     
    Technical features:
    - multi-frequency: from 433,92 Mhz to 868,35 Mhz
    - channels: 4
    - entry mode: PIN code (1-8 digits)
    - power supply: 12-24 VAC, 12-24 VDC; max 100mA / CR2 lithium battery included (3V)
    - tamper: yes
    - degree of protection: IP65
       
  • ANTENNAS

    Read more
    Universal radio antennas
    The capacity of radio devices can be influenced by environmental conditions (radio interference) and doesn't exclusively depend on the quality of the transmitter and receiver, it is actually determined by the quality of the antenna and its installation.
     
    Make the most from of the performance of your radio device with the range of universal antennas!
    Find the most suitable one by comparing their qualities and functions.
     
    – SMALL: 868 Mhz → appearance and stability
    – DUAL: 433/868 Mhz → mechanical resistance, dual-frequency
    – PLANE: 868 Mhz → stability and broadband (it tends to keep the frequency even in the presence of metal masses)
    – PIPE: 868 Mhz → long range, high gain
    – BASIC 433: 433 Mhz, with 3mts coaxial cable
    – BASIC 868: 868 Mhz, with 3mts coaxial cable
    All the antennas comply the RoHS/2 directive.
      Find out all of our universal range products: COPY-ONE, universal receiver (4 channels); COPY-MINI, universal receiver (2 channels); EGO, universal transmitter (4 channels)
  • Copy one universal receiver

    COPY-ONE

    Read more
    COPY-ONE: "Universal" self-learning receiver - 4 channels
    The COPY-ONE universal receiver allows extreme versatility for both new and existing installations by storing different remote controls both fixed and rolling codes, in a single receiver. This universal receiver allows, in most cases, to unify installations or replace receivers no longer operating without the need of replacing the existing remote controls, thus ensuring better service continuity and less discomfort for users.
    Technical data:
    - multifrequency: from 433,92 Mhz to 868,35 Mhz
    - channels: 4
    - power supply: 12-24 VAC, 12-24 VDC
    - dimensions: 46 x 91 mm
    (external optional box)
     
    Discover the other universal products: EGO universal multi-frequency transmitter,  EGO433 universal transmitter 433 MHz, COPY-MINI universal self-learning receiver (2 channels), EGO-KODE universal multi-frequency radio keypad.
       
    Storage of a fixed code transmitter - Channel 1 [video src="https://www.abexo.tech/wp-content/uploads/2020/09/Codice-fisso-su-COPY-MINI-sub-ita-no-audio.mp4"]
    Storing of a Faac/Genius transmitter - Channel 2 [video src="https://www.abexo.tech/wp-content/uploads/2020/09/Faac-genius-COPY-ONE-sub-ita-no-audio-COM.mp4"]
  • COPY-MINI

    Read more
    COPY-MINI: "Universal" self-learning receiver - 2 channels
    The COPY-MINI universal receiver allows extreme versatility for both new and existing installations by storing different remote controls both fixed and rolling codes, in a single receiver.
    This universal receiver allows, in most cases, to unify installations or replace receivers no longer operating without the need of replacing the existing remote controls, thus ensuring better service continuity and less discomfort for users.
    Technical data:
    - multifrequency: from 433,92 Mhz to 868,35 Mhz
    - channels: 2
    - power supply: 12-24 VAC, 12-24 VDC
    - dimensions: 72 x 55 x 19 mm
    - removable terminal block
    (external optional box)
    Discover the other universal products: COPY-ONE universal self-learning receiver (4 channels); EGO multifrequency universal transmitter (4 channels),  EGO433 universal transmitter 433 MHz, EGO-KODE universal multi-frequency radio keypad.
  • Sistema Marconi - ponte radio lungo raggio - Tecnologia LoRa

    MARCONI

    Read more
    Radio Link, long range radio, low power consumption
     
    The half duplex radio link MARCONI is capable of guaranteeing very long distance communications,high immunity to interferences, high sensitivity and very low energy consumptions. LINK T4 is a transmitter with encrypted communication capable of piloting the receiver LINK R4. The system allows to activate remote loads and it's ideal for long range activation and control applications, such as irrigation and alarm systems. The cyclical receiver also makes it possible to have a consumption lower than 1 mA, allowing the use in battery powered applications.
     
    BI-DIRECTIONAL This bi-directional communication makes it possible for the transmitter to know the status of the activated output.
     
Top