ALCR-36N
Read more
Compatible control unit for swing gates, 230V
Equivalent replacement for Alcor discontinued control units.
La centrale The ALCR-36N control unit is designed to control one or two 230V hydraulic or electromechanical operators and has been developed to directly replace discontinued control units.
Full electrical and functional compatibility makes it an ideal solution for restoring existing systems, allowing for rapid upgrades without any wiring modifications.
The control unit includes a 433 MHz radio receiver (rolling code and fixed code), supports the storage of up to 200 transmitters, and allows flexible management of operating logic: step-by-step, condominium, 4 steps and 4 steps plus. It also features specific configurations for hydraulic motors, photocell management, 12/24V or 230V electric locks, and electronic force adjustment.
Features and functionality:
Power supply: 230 Vac
No. of motors: 1 or 2 hydraulic or electromechanical motors
Maximum motor power: 0.5 Hp max
Accessory voltage: 24 Vac – max 8 W
Flexible automatic closing time: up to 240 seconds
Flashing output voltage and courtesy light: 230 Vac – max 40 W
Electrical lock output voltage: 12/24 V or 230 Vac
On-board receiver: 433 MHz, rolling code or fixed code
Storable transmitters: up to 200
Operating temperature: -20°C / +55°C
Selectable logic: step-by-step, condominium, 4 steps, 4 steps plus
Advanced functions: slowdown, water hammer, pedestrian opening, rapid closing
Photocell control (FAP and FCH) with DIP switch exclusion
UN-SE
Read more
433 MHz Compatible receiver
Replacement compatible with the 433 MHz Unico Receiver.
The UN-SE 433.92 MHz receiver is designed to ensure continuity of service on existing radio systems. It supports codes self-learning via radio and offers versatile operating logic, adaptable to different automation contexts.
The relay output allows devices to be controlled in pulse mode, held mode, step-by-step mode or via a programmable timer.
Suited for replacement or upgrade operations on systems already configured with 433 MHz remote controls, without structural modifications necessity
Principal characteristics:
- Compatible with Unico 433 MHz receiver
- Operating frequency: 433.92 MHz
- Radio code self-learning
- No. 1 relay output
- No. 4 operating logics: pulse, held, step-by-step, programmable timer (1–255 sec)
AP1
Read more
Control unit for 230V swing gates
Equivalent replacement for T1E discontinued control units.
This electronic control unit is designed as an equivalent replacement, fully pin-to-pin compatible with T1E discontinued control units. Suitable for double-door installations with 230V motors, it allows the automatic system to be restored without modifying the existing electrical system, reducing intervention times and costs.
Robust and durable, it is designed to ensure continuity of operations on existing systems that are still in use and full compatibility with traditional accessories and control devices. Supplied without a container, it can be installed in the original box or in compatible panels.
Combined with the UN-SE 433.92 MHz receiver unit (APE-117/0433), the control panel's compatibility is also extended to the T11 model.
Technical specifications:
- Power supply voltage: 230 Vac (+6% / -10%) – 50Hz
- Stand-by power consumption: 15 W
- Operating consumption: 680 W (with motor and accessories connected and functioning)
- Operating temperature: -20°C to +70°C
- Storage temperature: -40°C to +85°C
- Relative humidity: max 90% (non-condensing)
- Supplied without PVC container
AZ33
Read more
Compatible control unit for 230V swing gates
Equivalent replacement for ZA3 discontinued control units.
The AZ33 control unit is designed to control one or two 230V electromechanical motors for swing gates and is fully compatible with the ZA3 discontinued versions.
Full functional compatibility and removable terminals provide an immediate and safe replacement solution for restoring existing systems without modifying the original wiring.
The board includes several advanced features: electronic motor force adjustment, photocell management, step-by-step control and partial opening, courtesy light and flashing light output, water hammer function, dead man's switch mode and logic suitable for condominium contexts.
The on-board connector allows the use of the main radio modules at 433.92 MHz or 30.900 MHz.
Features and functionality:
Power supply: 230 Vac
No. of motors: 1 or 2 motors
Motor power supply: 230Vac (600 W max per motor)
Maximum motor power: 0.5 Hp max
Motor power adjustment: 50–100%
Flexible operating time: up to 80 seconds
Output voltage services: 24 Vac – max 20 W
Flexible automatic closing time: up to 120 seconds
Flashing output voltage and courtesy light: 230 Vac – max 200 W
Electrical lock output voltage: 12 Vac – max 15 W
Gate open indicator output voltage: 24 Vac – 3 W
Radio modules: grafting 433.92 MHz or 30.900 MHz (not included)
Auxiliary relay output: 230 Vac – max 15 A
Circuit breaker: 5 A
Fuse 12-24: 3.15 A
Operating temperature: -10°C / +50°C
Humidity: <95% (non-condensing)
Selectable logic: step-by-step, condominium, dead man's switch
Advanced functions: slowdown, water hammer, partial opening
Photocell control (FAP and FCH) with DIP switch exclusion
