SH230 MULTI
Read more
Command center for 230V shutters with multifrequency receiver included
This 230V rolling shutters control unit is designed to guarantee maximum reliability and ease of management.
Integrates a multifrequency radio receiver (433.92÷868.3 MHz) able to memorize fixed code radiocommands.
Possible functions: adjustable working time, programmable automatic closure, deadman function, only opening command and safety management (photocells, shutdown button)
The IP53 degree of protection and the thermoplastic casing make it suitable for installation in protected external environments.
Technical features:
- Power supply: 230 Vac ±10% (50 Hz)
- Motor exit: 230 Vac – max 800 W
- Flashing light exit: 230 Vac – max 40 W
- Service exit: 12 Vac
- Multi-frequency radio receiver 433.92÷868.3 MHz
- Memory capacity: up to 400 codes (MF/MFA version)
- Programmable working time: 3÷90 s
- Automatic programmable closing: max 240 s
AP2
Read more
Control unit for 230V sliding gates
Equivalent replacement for discontinued T2E control units.
This electronic control unit is an equivalent replacement for the T2E, perfectly pin-to-pin compatible and suitable for installation on sliding gates with 230V motors.
Designed to ensure maximum operational continuity even on systems no longer supported by the original manufacturer, it allows for rapid and reliable updating of existing automation without system modifications.
Supplied without a container, it is perfect for maintenance and restoration operations on older systems, maintaining performance levels unchanged.
Combined with the UN-SE 433.92 MHz receiver unit (APE-117/0433), the control panel's compatibility is also extended to the T22 model.
Technical specifications:
- Supply voltage: 230 Vac (+6% / -10%) – 50Hz
- Stand-by power consumption: 15 W
- Operating power consumption: 680 W (with motors and accessories connected and ready to use)
- Operating temperature: -20°C, +70°C
- Storage temperature: -40°C, +85°C
- Relative humidity: max 90% (non-condensing)
- Supplied without PVC container
STICK RG
Read more
Plug-in receiver compatible with fixed code, rolling code and HCS remote controls – 433.92÷868 MHz
This multi-frequency plug-in receiver is designed for direct integration into control units, equipped with a specific connector, offering maximum flexibility in radio command management.
It is compatible with most fixed code, rolling code and HCS radio controls operating in the 433.92 MHz and 868 MHz bands.
Equipped with two independent channels, configurable in pulse, bistable or timer mode (in seconds or minutes), it allows the control of multiple devices or functions from a single unit.
The on-board memory can store up to 250 remote controls, with a quick and easy storage procedure by self-learning.
Multi-frequency compatibility and configuration versatility make it the ideal solution for replacing universal plug-in receivers used in automation systems.
Technical features:
- Operating frequency: 433.92 ÷ 868 MHz
- Compatible with fixed codes, rolling codes and HCS
- Power supply: +5 Vdc
- Power consumption: 25 mA typical / 50 mA max
- 2 independent channels (Ch1 and Ch2)
- Output modes: impulsive, bistable, timer in seconds or minutes
- Channel output: +3 Vdc
- Memory capacity: up to 250 remote controls
- Quick programming with self-learning
- Single or total deletion of stored codes
- Status LED and code/error indication
- Compact dimensions: 49×31×11 mm
- Operating temperature: -10°C to +50°C
UN-SE
Read more
433 MHz Compatible receiver
Replacement compatible with the 433 MHz Unico Receiver.
The UN-SE 433.92 MHz receiver is designed to ensure continuity of service on existing radio systems. It supports codes self-learning via radio and offers versatile operating logic, adaptable to different automation contexts.
The relay output allows devices to be controlled in pulse mode, held mode, step-by-step mode or via a programmable timer.
Suited for replacement or upgrade operations on systems already configured with 433 MHz remote controls, without structural modifications necessity
Principal characteristics:
- Compatible with Unico 433 MHz receiver
- Operating frequency: 433.92 MHz
- Radio code self-learning
- No. 1 relay output
- No. 4 operating logics: pulse, held, step-by-step, programmable timer (1–255 sec)
