LOW POWER SIGNAL
LOW POWER SIGNAL - Image 2
LOW POWER SIGNAL - Image 3
LOW POWER SIGNAL - Image 4

LOW POWER SIGNAL

Category:

Optics for sensor profile

Extremely low power consumption
Integrated diagnostic system with visual display
LED indicator for switching status
OSE output signal
IP 67, fully protected electronics

LOW-POWER-SIGNAL automatically selects the output frequency depending on the connected device: safety signals transmitted to a battery-powered radio link will therefore have a lower frequency than if they were sent directly to the control panel via a spiral cable.
This increases battery life and ensures compatibility with most control panels on the market.

Technical specifications
Power supply 3…27 VCC
Maximum door width 1…12 m
Output OSE signal
Warning lights Yellow LED indicator
Connections 3×0,14 mm²
Protection degree IP67, electronics encapsulated in epoxy resin

Data Sheet

REQUEST INFORMATION

Related products

  • Micro fotocellula micro-p27s, con sincronismo, relè reed

    MICRO P27S

    Read more
    Micro photocell with synchronism and REED relay
    MICRO-P27 is a micro photocell with a miniaturized design that easily fits any fixing space - even the smallest ones, and guarantee a minimal visual impact of the photocell on the automation. The miniaturized design is typical of the MICRO range (Micro-Flash, Micro-Traffic, Micro-RGB). The integrated micro relay with REED technology, and without levers, also ensure a long lifespan and a wider power supply range - compared to traditional relays. Discover the other products of the MICRO range: MICRO-FLASH, lampeggiatore a led da parete; MICRO-TRAFFIC, led traffic light; MICRO-RGB, led signal light - RGB. TECHNICAL FEATURES: - Power supply: 12-24 Vdc/ca - Absorption: 60 mA - Relay: REED TECHNOLOGY - Max door width: 15 m - Relay capacity: 0,5 A - 24 V - Frequency: 1500 Hz - Light: modulated infra-red - Operating temperature: : -20°C, +60°C - Weight (plastic): 12gr [video src="https://www.abexo.tech/wp-content/uploads/2019/10/video_P27_teaser_v_3-1.mp4.mp4"]
     
  • L36

    L36

    Read more

    Laser technology sensor for industrial gates and doors

    L36 is an innovative photocell based on time-of-flight (ToF) laser technology, designed for use on gates as a security device. Compared to traditional photocells, it does not require two devices or reflectors. L36 uses a laser rangefinder to measure the distance to an obstacle. The photocell can be used in 3 different modes: Mode A OPERATION AS A PHOTOCELL This mode requires a fixed physical reference point opposite the laser rangefinder. Maximum detection distance: 9 m. The photocell analyses two events. Obstacle detection at shorter distance than the stored distance, during the learning phase. Mode B OPERATION AS A PROXIMITY SENSOR (APPROACH PERPENDICULAR TO THE LASER BEAM) Maximum reading distance 6 m, optimised for detecting movements perpendicular to the beam. The reading distance is programmable and can be adjusted in increments of 0.5 m during programming. Mode C OPERATION AS A SENSOR APPROACHING THE PHOTOCELL FROM ANY DIRECTION Maximum reading distance 6 m, optimised for detecting movements approaching the photocell from any direction. The reading distance is programmable and can be adjusted in increments of 0.5 m during programming. Technical characteristics: Power supply: 12-24V AC/DC Transmission/reception angle: +/- 25° Head rotation angle: 180° Maximum range Mode A: 9 m Modes B and C: 6 m Maximum output load: 30Vdc, 0.5A Operating temperature: -10°C to +60°C Protection class: IP54 Dimensions: 36x123x33 mm Weight: 69 g Data Sheet Instruction Manual
  • SPK

    SPK

    Read more

    Spiral cable

    SPK spiral cables are made from high-quality materials, making them suitable for the most intensive installations. The extension factor is four times the block length (BL). Spiral cables are resistant to microbes, hydrolysis and almost all mineral oils, thanks to a special sheath compound. In addition, spiral cables are UV-stable and halogen-free. The material is black PUR/PUR, the colour of the wires complies with DIN 47100: 3 wires = brown, white, green 4 wires = brown, white, green, yellow 5 wires = brown, white, green, yellow, grey 6 wires = brown, white, green, yellow, grey, pink Variable cable ends (see table), including 40, 50, 60, 80, 100 or 200 mm without sheath and equipped with cable lugs (AEH). Data sheet  
  • Sistema captive - bordi di sicurezza resistivi

    CAPTIVE

    Read more

    CRASHLESS safety edge

    The CAPTIVE crashless resistive edge is certified as a class 2 safety device according to EN 12978 The CRASHLESS ("impactless") function allows, for most of the gate's travel, to avoid collision with obstacles, cars or people. The two inhibitory magnets perform a dual function: - they deactivate the capacitive part when the gate is stopped to save battery life - during the closing phase, the capacitive device would read the closing column as an obstacle, but the magnets connected to the receiver inhibit the crashless function, leaving the safety edge active It is recommended to synchronize the inhibition of the capacitive function with the slowing down of the motor to more easily fall within the crash force limits imposed by current regulations. Available in sizes 1.20 - 1.60 - 2.00 - 2.50 mt. TECHNICAL DATA: - Operating temperature: -20°C, 55°C; - Operating consumption: 12 mA - Frequency: 868 Mhz - Degree of protection: IP65; Discover other sensitive security edges: ACTIVE, wired security edge; ACTIVE-R3, radio security edge.  
Top