EAGLE ARTEK
EAGLE ARTEK - Image 2

EAGLE ARTEK

Category:

Universal microwave opening sensor for automatic doors

Features:

Technology: Microwave
Detection mode: motion
Supply voltage**: 12-24V AC ±10% 50-60Hz; 12-24V DC +30% / -10%*
Transmitter frequency: 24.15 GHz
Mounting height: from 1,8m to 4m
Max. detection range: “wide”: 4x2m / “narrow”: 2×2,2m
Minimum detection speed: 5cm/s
Tilt angles: from 0° to 90° vertical; from -30° to +30° lateral
Operating temperature: -20°C, +55°C
Output**: Solid-state relay (free of polarity)
Max. switching voltage: 30 V AC / 42 V DC
Max. switching current: 100 mA (resistiva)
Degree of protection: IP54 (IEC/EN 60529)
Dimensions: 120mm (L) x 50mm (H) x 50mm (P)

 

* The Equipment must be powered by an approved Class II SELV limited power source. This requirement consists of the need for double insulation between primary voltages and the Equipment supply. The supply current should
be limited to max 3A. ** External electrical sources must be within specified voltages, max 15W and ensure double insulation from primary voltages

Instruction manual

REQUEST INFORMATION

Description

Related products

  • VIO-ST sensore di sicurezza ad infrarossi per porte automatiche e scorrevoli pedonali

    VIO-ST

    Read more

    Infrared safety sensor for sliding and automatic doors (EN16005)

    VIO-ST is a presence sensor made up of a double failsafe active infrared curtain, offering high protection of individuals. The three-dimensional area of the infrared curtain, without safety beams, protects people from any contact with the doors. The sensor guarantees optimal performance thanks to the high level of self-regulating infrared immunity. Adjustment of the infrared curtain width with the prisms (curtains of 12 or 24 spots depending on the prism used). Technical features: - Technology: infrared - Detection mode: presence o security - Supply voltage: 12-30 V DC -5%/+10% - Temperature range: da -25°C a +55°C - Output: Solid-state-relay - Max. contact voltage: 42V AC/DC - Degree of Protection: IP54 - Mounting height: from 2m to 3,5m - Conformity: EN 16005:2012 Instruction manual
  • Solidsense, sensore di sicurezza per porte ad anta battente

    SOLIDSENSE

    Read more

    Safety sensor for swing doors with closing edge protection

    SOLIDSENSE is a sensor that reliably protects people from injury. It combines maximum safety for automatic doors in demanding situations in accordance with EN16005 with perfect architectural integration into modern access solutions, meeting requirements for accessibility and comfort while also simplifying mounting and commissioning for installers.
    • Best anti-trap protection available
    • Intuitive & easy setup with SolidSense
    • Dynamic adjustment to changing environments
    Technical specifications:  - Technology: Solid-state scanner with time-of- flight technology - Supply Voltage: 24 VDC ±20% - No-load current: max. 200 mA per sensor - Response time:  50 ms with mounting height  2500 mm  80 ms with mounting height > 2500 mm - Signal output: Semiconductor relay, short-circuit-proof max. 30 V DC, max. 60 mA - Housing material: polycarbonate (PC) - Installation height: 1,8÷3,0 m - Connection type: 2.5 m cable, 8-core - Degree of Protection: IP65 - Light transmitter: IRED 850 nm - Operating temperature: -30 °C, +60 °C - Ambient humidity: max. 95% relative, non-condensing - Dimensions: 61 x 255 x 38,7 mm (L x H x P) - Conformity: RED2014/53/EU; RoHS2011/65/EU; MD2006/42/EC: EN 16005; DIN 18650; EN 12978; ISO 13849-1; EN 61508 1-4 Datasheet Instruction Manual
  • Dualsense, sensore per porte scorrevoli automatiche

    DUALSENSE S

    Read more

    Safety sensor for automatic sliding doors

    DUALSENSE S is the simple solution for activating and safeguarding automatic sliding door systems for internal and external use, in compliance with EN 16005. The sophisticated operating concept with intuitive menu navigation and a large display makes installation quick and easy. The sensor's configuration options also include functions for optimizing the building's energy efficiency. DUALSENSE S AIR module (protection) - DualSense S is a supplementary solution for places where only the AIR presence detector is required, for example if the secondary closing edges of a door may come into contact with people when opening. The operating concept and technical features of the AIR module correspond to those for the DualSense D. Technical specifications: - DUALSENSE S Technology : active infrared (AIR) AIR - Field dimensions: max. 2 × 0,20 m Number of spots: 2 rows of 12 spots each Performance level: PLd, cat. 2 (EN ISO 13849-1) - Supply Voltage: 11,5÷32 V CC - Current max.: 120 mA @ 24 V - Output: solid state relay, max. 34 V CC / 24 V CA, max. 40 mA - Installation height: 1,8÷4,0 m - Operating temperature: –20 °C, +60 °C - Degree of Protection: IP54 - Dimensions: (L × L × P) 252 x 61 x 51 mm - Conformity: MD 2006/42/CE, RED 2014/53/UE, RoHS 2011/65/UE Datasheet Instruction Manual
  • SSR-3/BL sensore di sicurezza sorvegliata con tecnologia "Door Learn"

    SSR-3/BL

    Read more
    Dual technology activation and monitored safety sensor With exclusive "Door Learn" technology
    Energy-saving sensor capable of ensuring the activation of pedestrian doors and an unprecedented level of security unprecedented at mounting heights no to 3.2m. TECHNICAL DATA -Technology: microwave + active infrared - Supply voltage: 12-24 Vdc/Vac ± 10% - Current consumption: 80 mA (24 VDC) - Installation height: adjustable 2000-3200mm - Temperature range: -20°C to +60°C - Degree of protection: IP54 - Dimensions: 265 x 60 x 43mm Data Sheet Instruction manual
Top