
SMALL53-IN
Read more
Flush-mounted selector switch with break release
TECHNICAL DATA
- Flush-mounted on tubular 40x60mm
- Interchangeable cylinder made in Italy
- Break release with hexagonal key
- Dimensions: 57x120hx37 mm
Data Sheet

SMALL53
Read more
Wall-mounted selector switch with break release
TECHNICAL DATA
- Break release with hexagonal key
- Interchangeable cylinder made in Italy
- Key with European cylinder
- Release lever in the keyfob
- Metal body
- Dimensions: 53x108hx44 mm
Data Sheet

COL
Read more
Fall preventing cables for gates
COL53 and
COL70 are
Gate fall arrest cables made of
stainless steel with Ø 5 mm x 133 wire section, with 2 loops. Complete with sheath and eyelet lug.
Versions available:
- COL53, length 530 mm
- COL70, length 700 mm

CONTROLGIR
Read more
"Parachute" brakes for sloping sliding gates
The CONTROLGIR line is indispensable for standardization in the presence of sliding gates on a slope ( it is necessary for there to be a rack). In case of unlocking of the automation gear motor, the internal hydraulic circuit (adjustable) has the function of "parachute," that is, to regulate the downward speed throughout the gate's travel. The operating speed should be adjusted just above that of the gearmotor so that it does not interfere with the automation.
CONTROLGIR-7
Braking system for sloping sliding gates - maximum slope 3,2° (7 Mn)
TECHNICAL DATA
M (required resistant moment): 7 Nm
Rack pitch: M4
Gate weight: 400 Kg (3920 N)
Slope: 3,2° MAX
Formula:
M [Nm] = P x sinß x 0,032
P = gate weight in Newtons (9.8N=1Kg)
sinß = sine of the tilt angle (ß= tilt in degrees)
P = 9.8 x 400kg = 3920 Newton
M = 3920 Newton x sin 3.2 x 0.032 = 7 Nm
CONTROLGIR-30
Braking system for sloping sliding gateCsO - mNaTxRimOuLmG IsRlo-p3e0 1 (33,90°N (3m0 )Nm)
TECHNICAL DATA
M (required resistant moment): 30 Nm
Rack pitch: M4
Gate weight: 400 Kg (3920 N)
Slope: 13,9° MAX
Formula:
M [Nm] = P x sinß x 0,032
P = gate weight in Newtons (9.8N=1Kg)
sinß = sine of the tilt angle (ß= tilt in degrees)
P = 9.8 x 400kg = 3920 Newton
M = 3920 Newton x sin 13.9 x 0.032 = 30 Nm
Data Sheet
Controlgir-7 Instructions manual
Controlgir-30 Instructions manual