SLIM37 blindino in alluminio da incasso con pulsantiera e leva di sblocco

SLIM37-IN

Category:

Built-in aluminum security box with push-button panel and release break

Aluminum security box SLIM 37, built-in version with push-button panel and release break.

TECHNICAL FEATURES:
– Small dimensions: 37 x 243h x 33 mm
– Hole 30 x 235 mm
– Built-in
– Standard electrical connection in accordance with 3-way terminal block
– Unlocking option from both outside and inside

 

REQUEST INFORMATION

Related products

  • CONTROLGIR

    CONTROLGIR

    Read more
    "Parachute" brakes for sloping sliding gates
    The CONTROLGIR line is indispensable for standardization in the presence of sliding gates on a slope ( it is necessary for there to be a rack). In case of unlocking of the automation gear motor, the internal hydraulic circuit (adjustable) has the function of "parachute," that is, to regulate the downward speed throughout the gate's travel. The operating speed should be adjusted just above that of the gearmotor so that it does not interfere with the automation. CONTROLGIR-7 Braking system for sloping sliding gates - maximum slope 3,2° (7 Mn) TECHNICAL DATA M (required resistant moment): 7 Nm Rack pitch: M4 Gate weight: 400 Kg (3920 N) Slope: 3,2° MAX Formula: M [Nm] = P x sinß x 0,032 P = gate weight in Newtons (9.8N=1Kg) sinß = sine of the tilt angle (ß= tilt in degrees) P = 9.8 x 400kg = 3920 Newton M = 3920 Newton x sin 3.2 x 0.032 = 7 Nm   CONTROLGIR-30 Braking system for sloping sliding gateCsO - mNaTxRimOuLmG IsRlo-p3e0 1 (33,90°N (3m0 )Nm) TECHNICAL DATA M (required resistant moment): 30 Nm Rack pitch: M4 Gate weight: 400 Kg (3920 N) Slope: 13,9° MAX Formula: M [Nm] = P x sinß x 0,032 P = gate weight in Newtons (9.8N=1Kg) sinß = sine of the tilt angle (ß= tilt in degrees) P = 9.8 x 400kg = 3920 Newton M = 3920 Newton x sin 13.9 x 0.032 = 30 Nm Data Sheet Controlgir-7 Instructions manual Controlgir-30 Instructions manual  
  • CREMAGLIERE M4 gamma di cremagliete in plastica e acciacio per cancelli scorrevoli

    CREMAGLIERE M4

    Read more
    Tecnopolymer and steel racks for sliding gates
    CRP500: - Single bar lenght 1mt - 6 mts pack of tecnopolymer rack - N.5 central fixing elements module 4/ screws included (5 screws per meter) - Double sided toothing to make it usable on both sides - No steel core: design and shapes studied to cancel any chance of strain - Maximum capacity 500 kg CRP700: - Single bar lenght 1mt. - 10 mts pack of tecnopolymer rack - N.6 fixing elements module 4 - Maximum capacity 700 kg CRP1200: - Single bar lenght 1mt. - 8 mts pack of tecnopolymer rack - N.6 fixing elements module 4 - Maximum capacity 1200 kg CRM3012: - Single bar lenght 1mt - 4 mts pack of galvanized steel racks (module 4) - With bolts and spacers for wall mounting (to be welded) Datasheet Tecnopolymer racks Datasheet Steel racks  
  • MOVEO

    MOVEO

    Read more
    Manual barrier (stainless steel)
    The MOVEO manual barrier allows you to demarcate access to a gateway up to 5.3 meters. The foundation plate, fixing base and the external case are made of stainless steel. The movement of the boom is balanced in all positions and the release is protected by key lock. Five rod lengths available: 3 mt, 4 mt, 4.5 mt, 5.3 mt and 6 mt.    
  • ELV elettroserratura verticale 12V con riscontro

    ELV

    Read more
    Vertical 12V electric lock with ground latch
    ELV is a vertical electric lock 12V with ground latch. TECHNICAL FEATURES:. - Release mechanism 17 Vdc (12Vac) - Release lock and n.2 fixing screws - Catch plate - 3 keys - Metal body - Dimensions: 66x35x122h mm  
Top