CONTROLGIR
Read more
"Parachute" brakes for sloping sliding gates
The CONTROLGIR line is indispensable for standardization in the presence of sliding gates on a slope ( it is necessary for there to be a rack). In case of unlocking of the automation gear motor, the internal hydraulic circuit (adjustable) has the function of "parachute," that is, to regulate the downward speed throughout the gate's travel. The operating speed should be adjusted just above that of the gearmotor so that it does not interfere with the automation.
CONTROLGIR-7
Braking system for sloping sliding gates - maximum slope 3,2° (7 Mn)
TECHNICAL DATA
M (required resistant moment): 7 Nm
Rack pitch: M4
Gate weight: 400 Kg (3920 N)
Slope: 3,2° MAX
Formula:
M [Nm] = P x sinß x 0,032
P = gate weight in Newtons (9.8N=1Kg)
sinß = sine of the tilt angle (ß= tilt in degrees)
P = 9.8 x 400kg = 3920 Newton
M = 3920 Newton x sin 3.2 x 0.032 = 7 Nm
CONTROLGIR-30
Braking system for sloping sliding gateCsO - mNaTxRimOuLmG IsRlo-p3e0 1 (33,90°N (3m0 )Nm)
TECHNICAL DATA
M (required resistant moment): 30 Nm
Rack pitch: M4
Gate weight: 400 Kg (3920 N)
Slope: 13,9° MAX
Formula:
M [Nm] = P x sinß x 0,032
P = gate weight in Newtons (9.8N=1Kg)
sinß = sine of the tilt angle (ß= tilt in degrees)
P = 9.8 x 400kg = 3920 Newton
M = 3920 Newton x sin 13.9 x 0.032 = 30 Nm
Data Sheet
Controlgir-7 Instructions manual
Controlgir-30 Instructions manual
COL
Read more
Fall preventing cables for gates
COL53 and
COL70 are
Gate fall arrest cables made of
stainless steel with Ø 5 mm x 133 wire section, with 2 loops. Complete with sheath and eyelet lug.
Versions available:
- COL53, length 530 mm
- COL70, length 700 mm
SLIM37-IN
Read more
Built-in aluminum security box with push-button panel and release break
Aluminum security box
SLIM 37,
built-in version with push-button panel and release break.
TECHNICAL FEATURES:
- Small dimensions: 37 x 243h x 33 mm
- Hole 30 x 235 mm
- Built-in
- Standard electrical connection in accordance with 3-way terminal block
- Unlocking option from both outside and inside
UNI-SAVE
Read more
Universal protection module
UNI-SAVE is a
universal protection module for opening systems.
It is composed of a modular metal structure that can adapt to different uses. By combining different modules, it can provide the optimal protection for the POLY chain lifter (2 elements) or the ELIOX solar boom (3 elements).
Find out systems for using the protection module:
POLY, automatic chain barrier
