HP1

HP1

Category:

Infrared safety beam sensor for sliding doors

Operating ranger of 0,15 m to 10 m
Single set of safety beam heads
Detection Method:
infrared Detection
Detection Range: 15cm÷10m
Sensor Dimensions Controller:
43,7mm (L), 114,2mm (A), 29mm (P)
Sensor Head: 15mm diameter
Power Supply: 12÷30Vca o Vcc
Power Consumption Max: Max 1W
Operating Temperature: 30°C, +55°C

Data Sheet

Instruction manual

REQUEST INFORMATION

Related products

  • IXIO-DT sensore doppia tecnologia sicurezza e apertura per porte scorrevoli automatiche EN16005/DIN18650

    IXIO-DT

    Read more

    Dual-technology sensor for automatic sliding doors (opening and safety) (EN16005/DIN18650)

    IXIO-DT is a dual technology motion and presence sensor, combining microwave activation and infrared presence detection for the automatic sliding door industry. The movement (opening and closing the door) is operated by a microwave doppler radar, while user's safety is guaranteed thanks to the two 24-spot infrared courtains active for background analysis. Thanks to the unidirectionality of the radar field, the door closes sooner and is more energy efficient. Rejection of cross-traffic is also optimized to reduce unwanted openings caused by passing pedestrians. Intuitive configuration thank to multilingual LCD screen and 4 visible spots that indicate the infrared curtain angle. Technical features: - Technology: Microwave doppler radar + Active infrared with background analysis - Detection mode: Motion (Radar) + Presence (Infrared) - Output: Solid-state-relay (Motion) + Solid-state-relay (Presence) - Supply voltage: 12-24Vac +/-10%; 12-30Vdc +/-10% - Mounting height: from 2m to 3,5m - Temperature range: -25°C +55°C; 0 - 95% relative humidity, non condensing - Conformity: EN 16005:2012; DIN 18650-1:2010 Chapter 5.7.4 Data sheet Information manual
  • EAGLE ARTEK

    EAGLE ARTEK

    Read more

    Universal microwave opening sensor for automatic doors

    Features: Technology: Microwave Detection mode: motion Supply voltage**: 12-24V AC ±10% 50-60Hz; 12-24V DC +30% / -10%* Transmitter frequency: 24.15 GHz Mounting height: from 1,8m to 4m Max. detection range: “wide”: 4x2m / “narrow”: 2x2,2m Minimum detection speed: 5cm/s Tilt angles: from 0° to 90° vertical; from -30° to +30° lateral Operating temperature: -20°C, +55°C Output**: Solid-state relay (free of polarity) Max. switching voltage: 30 V AC / 42 V DC Max. switching current: 100 mA (resistiva) Degree of protection: IP54 (IEC/EN 60529) Dimensions: 120mm (L) x 50mm (H) x 50mm (P)  
    * The Equipment must be powered by an approved Class II SELV limited power source. This requirement consists of the need for double insulation between primary voltages and the Equipment supply. The supply current should be limited to max 3A. ** External electrical sources must be within specified voltages, max 15W and ensure double insulation from primary voltages
    Data sheet Instruction manual
  • HR100-CT/BL

    HR100-CT/BL

    Read more
    Advanced unidirectional detection sensor with monitored security system and exclusive "Door Learn" function
    Extraordinary state-of-the-art sensor capable of capable of ensuring the activation of doors pedestrian doors and unprecedented security at mounting heights no to 3m. TECHNICAL DATA - Technology: active infrared reflection - Supply voltage: 12-24 Vdc/Vac ± 10% - Current consumption: 60 mA (24 VDC) - Installation height: adjustable 2000-3000mm - Temperature range: -20°C to +60°C - Output: Open collector 7.5mA (Min) load resistor - Degree of protection: IP54 - Dimensions: 230 x 70 x 44 mm Data Sheet Instruction manual
  • Dualsense, sensore per porte scorrevoli automatiche

    DUALSENSE S

    Read more

    Safety sensor for automatic sliding doors

    DUALSENSE S is the simple solution for activating and safeguarding automatic sliding door systems for internal and external use, in compliance with EN 16005. The sophisticated operating concept with intuitive menu navigation and a large display makes installation quick and easy. The sensor's configuration options also include functions for optimizing the building's energy efficiency. DUALSENSE S AIR module (protection) - DualSense S is a supplementary solution for places where only the AIR presence detector is required, for example if the secondary closing edges of a door may come into contact with people when opening. The operating concept and technical features of the AIR module correspond to those for the DualSense D. Technical specifications: - DUALSENSE S Technology : active infrared (AIR) AIR - Field dimensions: max. 2 × 0,20 m Number of spots: 2 rows of 12 spots each Performance level: PLd, cat. 2 (EN ISO 13849-1) - Supply Voltage: 11,5÷32 V CC - Current max.: 120 mA @ 24 V - Output: solid state relay, max. 34 V CC / 24 V CA, max. 40 mA - Installation height: 1,8÷4,0 m - Operating temperature: –20 °C, +60 °C - Degree of Protection: IP54 - Dimensions: (L × L × P) 252 x 61 x 51 mm - Conformity: MD 2006/42/CE, RED 2014/53/UE, RoHS 2011/65/UE Data sheet Instruction Manual
Top