IXIO INDUS

Related products

• 

  HELIOS 2T

  Read more

  Microwave motion and AIR presence sensor for industrial doors (opening and safety)

  The HELIOS 2T combined sensor features a wide microwave field for quick activation. A double-row active infrared curtain detects people and vehicles within close range of the industrial door. The detector differentiates between vehicles and people, and reliably masks both them and crossing traffic. Helios 2T thus reduces door opening times, cuts down signicantly on the energy consumed by the building and makes decisive contributions to sustainability. Reduced consumption thanks to energy-saving functions. Helios 2T opens the industrial door only for vehicles and keeps it open as needed. Cross traffic masking prevents unintended opening. Technical specifications:  Technology: Microwave Doppler effect, active infrared reflection Transmission frequency: 24.2 GHz Transmitter radiated power: < 12,70 dBm Operating voltage: 12–24 VAC ±10% (50/60 Hz), 12–30 VDC ±10% Power consumption: < 3 W (< 4,5 VA con AC) Mounting height: from 2 m to 6 m Housing material: ABS / PA black color Degree of Protection: IP65 Activation output: semiconductor relay, max. 50 VAC/V DC, max. 0.3 A (resistance load) Additional safety output: Semiconductor relay, max. 50 VAC/V DC, max. 0.3 A (resistance load) AUX output: Semiconductor relay, max. 50 VAC/V DC, max. 0.3 A (resistance load) Communication method: Bluetooth LE (version 4.0) Operating temperature: from -35 to +55 °C Dimensions: 210 × 50 × 130 mm Certications: EN 61000-5-2:2005; EN 61000-6-3:2007/A:2011/AC2012; EN 300 323 V2.1.1:2016-11; EN 300 440 V2.2.1:2018-07; EN50581:2018 Datasheet Instruction Manual
• 

  FALCON/FALCON XL

  Read more

  Sensor for industrial doors

  Functional features: detects and discriminates parallel traffic of pedestrians and vehicles, preventing the door from opening. Discriminates pedestrians from vehicles regardless of their speed.
  
  Technical features Technology: Microwave and microprocessor Transmitter frequency: 24.125 GHz Transmitter power: <20 dBm EIRP Transmitter power density: <5mW/cm2 Angle of inclination: from 0° to 180° in elevation Mounting height: 3.5 to 7 m Minimum detection speed: 5 cm/s (in the sensor axis) Detection zone (typical): 4 m (W) x 5 m (D) (installation height 5 m) Detection mode: movement Supply voltage: 12V to 24V AC +/- 10%, 12V to 24V DC +30% / -10% Power consumption: < 2W Output relay: potential-free contact Max. voltage at contacts: 42V AC/DC Max. current at contacts: 1A (resistive) Max. switching power: 30W (DC) / 60 VA (AC) Manual adjustment: orientation of detection field (mechanical) / Multiple functions (via buttons) Temperature range: -30°C to +60°C Product compliance: R&TTE-1999/5/EC, EMC-89/336/EEC Dimensions: 127mm (D) x 102mm (W) x 96mm (H) Housing: black ABS and polycarbonate Aluminium bracket: black anodised Cable length: 10 m Data sheet Instructions Manual
• 

  CONDOR

  Read more

  Dual technology sensor for industrial doors (opening and security)

  CONDOR is a presence and motion sensor for industrial doors, which integrates a microwave motion detector and an active infrared presence sensor into a single product. Active infrared technology detects any vehicle or object stationary near the door. The dual technology of microwaves (motion) and active infrared (presence) is an excellent alternative to magnetic loops: door opening and surveillance of the area in front of the door. It filters parallel traffic, pedestrians and any interference and is easy to install. Designed for industrial environments IP65, robust housing and solution against vibrations and environmental interference. Reliable and accurate The planar antenna allows for accurate discrimination between pedestrians and vehicles and does not detect parallel traffic. Energy saving Presence detection reduces the use of the door timer, allowing energy savings proportional to the number of opening cycles.   Technical features Mounting height: 3,5 - 6 m Power supply voltage: 12V a 24V AC ±10%; 12V a 24V DC +10% / -3% Mains frequency: 50 - 60 Hz Power consumption: < 3,5 W/VA Output: n.2 relays with potential-free switching contact Operating temperature: -30° C, +60°C (0-95% relative humidity, non-condensing) Doppler radar Microwave Detection mode: Movement Emitted frequency/wavelength: 24.150 GHz Power density emitted: < 5 mW/cm2 Detection range: 4 x 5 mt Minimum detection speed: 5 cm/sec Reaction time: 100 ms Inclination angle: - 8° / 22° (el. to the front panel) Active infrared Detection mode: Movement and presence Emitted frequency/wavelength: 875 Nm Power density emitted: < 250 mW/m2 Detection range: 4x4 mt (emission points)* * area detected with the SPOTFINDER, slightly larger than the detection range Minimum detection speed: 5 cm/sec to activate a detection Reaction time: 250 ms Inclination angle: 15° / 45° Compliant with regulations EN 300 440-2 V1.4.1, EN 301 489-1 V1.9.2, EN 301 489-3 V1.6.1, EN 62311, EN 62479 Data Sheet Instructions Manual
• 

  HERKULES 2E

  Read more

  Radar motion sensor for industrial doors (opening)

  The HERKULES 2E microwave motion detector for the activation of industrial doors is characterised by its outstanding functionality, user-friendliness and reliability. Depending on the requirement or needs of the customer, the microwave detector detects, differentiates between or masks out people or vehicles and can switch the output relays separately, making the Herkules 2E a powerful all-rounder for a broad range of industrial door applications.

  • Quick response time and easy installation
  • Two independent outputs offer maximum flexibility for every application
  • Cross traffic optimisation and object detection enable significant energy savings

  Pulse on exit function This function signals the industrial door to close after the activation field is cleared and vehicles leave. The shorter door opening time helps to reduce energy requirements in heated or air-conditioned buildings. Technical specifications:  Technology: Doppler radar with planar module Transmission frequency: 24.05 – 24.25 GHz Transmitter radiated power: < 20 dBm Operating voltage: 12–36 Vdc / 12–28 Vac, (45–65 Hz) Mounting height: from 2 m to 7 m Housing material: Black anodised aluminium, polycarbonate cover Degree of Protection: IP65 Outputs: relay Switching voltage: 48 Vac/dc max Switching current: 0,5 A max Connection: cable di 10 m, 6 x AWG 24 (0,2 mm²) Operating temperature: da -30 a +60 °C Dimensions: 134 x 85 x 75 mm Certications: FCC / IC / CE Datasheet Instruction Manual