MEGA-BLINK
Read more
Universal LED flashing light, multitension, with high luminous efficacy and integrated buzzer
MEGA-BLINK is a
universal multitension LED flashing light ideal to complete your system: the
IP67 integrated buzzer and the internal led board equipped with
18 leds, laid out
all around, ensure an excellent visual and acoustic activity when the automation is moving.
This flashing lamp is equipped with
wall-mounting bracket and thanks to its jumper you can
select the type of light (steady or flashing light). The internal electronic board (MEGA-RETROFIT) guarantees mega-visibility and
high luminous efficacy, thanks to its 18 leds laid out all around: 6 on the front, 6 on the rear and 3 per each side.
The MEGA-BLINK flashing lamp is also available without integrated buzzer.
Discover the two versions of the universal led multitension board: Retrofit (9 led, low consumption) and MEGAretrofit, mega-visibility - used in MEGA-BLINK.
Discover the other version of this flashing lamp: BLINK, 9 leds flashing lamp, low consumption.
MICRO FLASH
Read more
Wall flashing LED
MICRO FLASH is the innovative led flashing light designed to make the automation of garage doors better looking and high tech looking.
In the early years of spread of automatic gates the cost to have them was very high. The automation was economically for the few and the flashing light, installed in evidence, in addition to its role of signaller, was used as a status symbol: large and very showy.
Today the gate automation is affordable for many and the role of the flashing light has changed.
MICRO-FLASH is a small flashing light perfectly integrable in
the system because of its size, but at the same time gives the
maximum visibility during movement to signal the danger.
Discover the other universal led flashing lamps: BLINK (available with yellow and white lens),
ALF6 (wall-mounting, available with yellow and white lens),
VOLT.
Discover our spare universal led boards: RETROFIT and MEGARETROFIT, if you need megavisibility.
NEONFLEX10
Read more
Silicone LED light diffuser with white light and aluminium profile
NEONFLEX10 is a flexible LED strip with fixed white light, designed to ensure maximum visibility in automation, access control and signalling systems.
Ideal for highlighting the opening or presence of doors, gates and driveways, it comes complete with an aluminium profile for quick, secure and durable installation.
The light source uses high-density LED technology, capable of generating continuous and uniform lighting without the visible light points typical of traditional strips, thus ensuring a diffused and extremely clean effect. It is available in three lengths – 1000 mm, 1500 mm and 2000 mm – and can be shortened to size thanks to the integrated cutting notches, which facilitate adaptation during installation.
Its anti-UV treatment, solvent resistance and IP67 protection rating make it perfect for outdoor applications, even in harsh conditions with dust, rain, salt water or chemicals.
Technical features:
Power supply: 24 Vdc
Power: 10 W/m
Brightness: 486 lm
Light temperature: 3000 K
Degree of protection: IP67
Dimensions: 30 x 13 x 1000 mm /30 x 13 x 1500 mm /30 x 13 x 2000 mm
Profile: Aluminium
Wiring: Cable length 100 cm
Operating temperature: -25°C, +60°C
