ACTIVE-RES
Read more
Resistive wired safety edges
Easy to install and can be shortened to size, ACTIVE-RES is using conductive technology in a small sensitive edge.
The safety device ensures a rapid response to impacts along the entire length of the structure.
Control board for resistive edges: equipped with two channels, ensures continuous system self-checking, which is blocked in the case of faults.
Available in protectioncategory 2 PL D (IMQ-certified)
Technical features:
- Operating temperature: -20°C, +55°C
- Degree of protection: IP65
CAPTIVE
Read more
CRASHLESS safety edge
The
CAPTIVE crashless resistive edge is certified as a
class 2 safety device according to EN 12978
The
CRASHLESS ("impactless") function allows, for most of the gate's travel, to avoid collision with obstacles, cars or people.
The
two inhibitory magnets perform a dual function:
- they deactivate the capacitive part when the gate is stopped to save battery life
- during the closing phase, the capacitive device would read the closing column as an obstacle, but the magnets connected to the receiver inhibit the crashless function, leaving the safety edge active
It is recommended to synchronize the inhibition of the capacitive function with the slowing down of the motor to more easily fall within the crash force limits imposed by current regulations.
Available in sizes 1.20 - 1.60 - 2.00 - 2.50 mt.
TECHNICAL DATA:
- Operating temperature: -20°C, 55°C;
- Operating consumption: 12 mA
- Frequency: 868 Mhz
- Degree of protection: IP65;
Discover other sensitive security edges:
ACTIVE, wired security edge;
ACTIVE-R3, radio security edge.
P41
Read more
Pair of adjustable infrared photocells
The P41 photocells are adjustable and with a range of up to 15 meters.
Technical features:
Power supply: 12/24 Vdc/ac
Absorption: 60 mA
Relay capacity: 1A – 24V
I.R. wavelength: 880 nm
Range: 15 mt
Modulation frequency: 1500 Hz
Synchronized mode: only when supplied with alternating current
Operating temperature: -20°C, +60°C
Datasheet (pdf)
User Manual (pdf)
