LZR-I100/LZR-I110

LZR-I100/LZR-I110

Category:

Security sensor for swing and sliding gates and industrial doors

LZR-i100 and LZR-i110 detectors are based on highly accurate time-of-flight technology, ensuring optimal safety at the threshold and in the proximity of the door, with four laser curtains that define corresponding detection areas.

 

PERFORMANCE
– Adjustable detection area depth (up to 1 m) depending on installation height
– Certified safety solution for industrial doors: PL “d” / CAT 2 according to EN ISO 13849-1 and type E according to EN 12453
– High level of safety with complete three-dimensional detection in front of the door
– Small object detection

APPLICATIONS
– Safety during door opening and closing with 2 separate detection zones
– Possibility to create 2 virtual buttons for door opening

DESIGNED FOR INDUSTRIAL CONTEXTS
– Filters door vibrations and environmental interference
– Filters door frame deformations caused by wind
– Protection rating IP65

Technical features
LZR-i110 – Maximum detection distance: 5 m × 5 m
LZR-i100 – Maximum detection distance: 9.9 m × 9.9 m
Power supply: 10-35V DC on connector
Output: 2 electronic relays (galvanic isolation –
polarity-free)
Maximum switching voltage: 35 VDC / 24 VAC
Maximum switchable current: 80 mA (resistive)
Dimensions: 125 mm (W) × 93 mm (D) × 70 mm (H)
(mounting bracket +14 mm)
Protection rating: IP65
Operating temperature: -30°C to +60°C under power
Compliance: EMC 2014/30/EU; LVD 2014/35/EU; MD
2006/42/EC; ROHS 2 2011/65/EU; EN 12453 chapter
5.1.1.6, chapter 5.5.1 Safety device E; EN 12978; EN ISO
13849-1 Pl ‘d’/ CAT2; EN 60529; IEC 60825-1; EN
60950-1; EN 61000-6-2; EN 61000-6-3; IEC 61496-1; EN
61496-3 ESPE Type2; EN 62061: 2005 SIL 2; DIN 18650-1
Chapter 5.7.4

Data sheet
Instructions Manual

 

REQUEST INFORMATION

Related products

  • Micro fotocellula micro-p27s, con sincronismo, relè reed

    MICRO P27S

    Read more
    Micro photocell with synchronism and REED relay
    MICRO-P27 is a micro photocell with a miniaturized design that easily fits any fixing space - even the smallest ones, and guarantee a minimal visual impact of the photocell on the automation. The miniaturized design is typical of the MICRO range (Micro-Flash, Micro-Traffic, Micro-RGB). The integrated micro relay with REED technology, and without levers, also ensure a long lifespan and a wider power supply range - compared to traditional relays. Discover the other products of the MICRO range: MICRO-FLASH, lampeggiatore a led da parete; MICRO-TRAFFIC, led traffic light; MICRO-RGB, led signal light - RGB. TECHNICAL FEATURES: - Power supply: 12-24 Vdc/ca - Absorption: 60 mA - Relay: REED TECHNOLOGY - Max door width: 15 m - Relay capacity: 0,5 A - 24 V - Frequency: 1500 Hz - Light: modulated infra-red - Operating temperature: : -20°C, +60°C - Weight (plastic): 12gr [video src="https://www.abexo.tech/wp-content/uploads/2019/10/video_P27_teaser_v_3-1.mp4.mp4"]
     
  • Sistema captive - bordi di sicurezza resistivi

    CAPTIVE

    Read more

    CRASHLESS safety edge

    The CAPTIVE crashless resistive edge is certified as a class 2 safety device according to EN 12978 The CRASHLESS ("impactless") function allows, for most of the gate's travel, to avoid collision with obstacles, cars or people. The two inhibitory magnets perform a dual function: - they deactivate the capacitive part when the gate is stopped to save battery life - during the closing phase, the capacitive device would read the closing column as an obstacle, but the magnets connected to the receiver inhibit the crashless function, leaving the safety edge active It is recommended to synchronize the inhibition of the capacitive function with the slowing down of the motor to more easily fall within the crash force limits imposed by current regulations. Available in sizes 1.20 - 1.60 - 2.00 - 2.50 mt. TECHNICAL DATA: - Operating temperature: -20°C, 55°C; - Operating consumption: 12 mA - Frequency: 868 Mhz - Degree of protection: IP65; Discover other sensitive security edges: ACTIVE, wired security edge; ACTIVE-R3, radio security edge.  
  • LZR-H100

    LZR-H100

    Read more

    Security laser barrier detector

    LZR-H100 detector oers a real alternative to magnetic loops: less time required for installation, detection of all types of vehicles and greater adaptability. The laser sensor for automatic barriers is used to open, protect and/or detect a presence. It oers great flexibility in defining the width and depth of the detection zones. Comfortable opening Detection of all types of vehicles: cars, electric vehicles, vehicles made of composite materials, trucks with trailers, etc. Detection of vehicle trajectory: approaching or moving away. User safety LZR-H100 protects vehicles and people within the safety field from contact with the barrier (installation with reference point).
    Pedestrian & parallel traffc filter The barrier only opens when a vehicle is approaching. Pedestrians and parallel traffc in the opening field are screened. Easy installation Product installation without any impact on the surrounding environment, with simple delimitation of the detection fields independently from one another, by walking in front of the sensor.
    Technical features Technology: laser scanner, time-of-flight (ToF) measurement Maximum detection distance: 9.9 m × 9.9 m Emission specications: IR laser (CLASS 1) = wavelength 905 nm; max. pulse output power 0.10 mW Visible laser (CLASS 2) = wavelength 635 nm; max. CW output power 0.95 mW Power supply: 10-35 V DC on the detector side Input: 1 optocoupler (galvanic isolation - non-polarised) Output: 2 electronic relays (galvanic isolation - polarity-free) Maximum switching voltage: 35V DC / 24V AC Maximum switchable current: 80 mA (resistive) Power consumption: < 5 W Response times: Motion detection: typically 200 ms (adjustable); Presence detection: typically max. 20 ms; max. 80 ms Vibrations: < 2 G Material/Colour: PC/ASA/black Dimensions: 125 mm (W) × 93 mm (D) × 70 mm (H) (mounting bracket + 14 mm) Protection degree: IP65 Operating temperature: -30°C, +60°C under voltage / -10°C, +60°C without voltage Compliance: EMC 2014/30/EU; LVD 2014/35/EU; RoHS 2 2011/65/EU; MD 2006/42/EC EN 61000-6-2; EN 61000-6-3; EN 60950-1; EN 60825-1; EN 50581; EN ISO 13849-1 (Pl “d” CAT 2); EN 62061 (SIL 2); EN 61496-1 (Type 2); EN 12978; EN 12453 (Device E)
    Data Sheet Instructions Manual
  • AOS124

    AOS124

    Read more

    OSE signal converter for LIGI07

    The AOS124 signal converter allows a LIGI light curtain with OSE output to be adapted to control panel that do not have this technology. The OSE signal is converted into a relay signal (potential-free). Advantages 1 input for 1 OSE device 1 relay output + test input NO or NC relay output LED indicators for input and output status Category 2 device, compliant with ISO13849-1 standard Technical specifications Power supply 19...35 VCC o 19...30 VCA Input 1x OSE signal Output Relay/TEST inputs Light Indicator Yellow LED Security Cat. 2, ISO 13849-1 Protection degree IP65 Data Sheet
Top