ARGOS

Related products

• 

  INFRA16

  Read more

  Pair of synchronized photocells

  The INFRA16 photocells are synchronized and with a range of up to 20 meters. Technical features:. Power supply: 12/24 VDC/ac Absorption: 60 mA Relay capacity: 1A - 24V I.R. wavelength: 880 nm Range: 20 mt Modulation frequency: 1500 Hz Synchronized mode: only when supplied with alternating current Operating temperature: -20°C, +60°C Datasheet (pdf)
• 

  LIGI 07

  Read more

  Photoelectric immaterial barriers for sectional and high-speed doors

  As with all other Witt products, the LIGI 07 barrier has been specifically designed to operate in the harsh conditions typical of industrial gates. The super-compact, integrated design measures just 12x15mm, offering perfect protection against the humidity and vibrations typical of automatic door installations. The LIGI 07 barrier sets new standards for the future with state-of-theart electronics and intelligent firmware. It is compatible with all standard control units for automation and can be used with almost all existing systems. Advantages Very compact design Long range Integrated electronics Adaptable to different types of installations For doors up to 10 m wide Can be installed in the door jamb with the BLANKING feature (beam cancellation) Extremely robust, all components are integrated into a single metal body Pre-drilled with front holes for direct mounting Available with OSE output or solid-state relay (SSR) Electronic self-alignment Integrated diagnostics Highly resistant to external optical interference Compact size: only 12x15mm Technical specifications Passage width 1,6 - 10 m Operating voltage 10 - 30 Vcc Current consumption Transmitter: approx. 30 mA (24 Vdc) (24 Vdc) Receiver: approx. 20 mA (24 Vdc) Power consumption approx 1,2 W Optical emission modulated infrared OSE output Approximately 950 Hz, alternating signal, 4 V 20 mA, short-circuit protection and protected against polarity reversal Maximum leakage current max 30 uA Pull-down resistance 220 ohm Output SSR solid state relay 100 mA, protected circuits Intrinsic capacity 220 nF, max. 30 Vcc, max. 21 Vca, Rs on < 35 ohm Response time < 100ms Reboot time < 400 ms Environment lighting > 100 klux External material Fully resin-coated aluminium profile Connector 6-pin M8 plug Certification IP67, EN60529 Operating temperature -20°, +60°C Storage temperature -30°, +70°C Available versions: -OSE output with blanking function (gradual beam blanking during door downward movement) -SSR output (solid state relay) selectable NC/NO, with blanking function LIGI 07 can ONLY be installed on high-speed doors

  Data Sheet

   
• 

  REFLEX

  Read more

  Polarized light photocell

  The polarized light photocell REFLEX is quick and easy to install: the wiring, in fact, takes place only on one side, while on the opposite side it is sufficient to place the reflector at the same height as the photocell. Alignment between the two elements is facilitated by positioning LEDs. The range of the REFLEX photocell varies from 8 to 15 mt, depending on the retro-reflector: - rectangular - 8 mt - round - 12 mt - square - up to 15 mt In addition, the wide range of accessories ensures its excellent reliability and preserves the photocell from condensation, rain, shocks and reflections. TECHNICAL DATA:. - Power supply: 10..36 Vdc / 24 Vac 25% - Operations and power consumption: < 100 ms on / max 30mA/24V - Light type and cone opening: 68 0nm / approx. 1.50 total angle - Delay: < 10 ms - Range (depending on reflector): 8mt - rectangular, 12mt - round, 15mt - square - Cable connections: max 1.5mm2 - Protection Degree: IP65 (EN60529); - Operating temperature: -25° / 60°. - Dimensions (LxWxH) and weight: 86 x 44 x 39 mm / 60 gr. WARNING: It is important to recognize the real REFLEX photocell from the copies. To make sure you are using the original, check out our pdf guide "How to recognize the REAL REFLEX".

    Datasheet (pdf)

    User Manual(pdf)

    How to recognize the REAL reflex (pdf)
• 

  FLATSCAN IP66

  Read more

  Laser detector for gates and industrial doors

  FLATSCAN IP66 is a compact, single curtain sensor composed of 400 beams, based on LASER technology, designed for use on automatic industrial doors and swing gates. The high accuracy of laser technology ensures precise detection of people and vehicles within a range of 5.5 m x 5.5 m, in indoor and outdoor environments. The robust metal housing with IP66 protection rating makes the sensor suitable for installations in industrial environments and outdoor applications. Technical characteristics: Technology: LASER scanner, time-of-flight measurement Mounting height: from 2.5 m to 5.5 m Maximum detection area: Max. 5.5 m × 5.5 m (4 m @ 5% reflectivity) Detection types: presence Radar field of view: 90° Tilt angle: ±3° (with bracket) Power supply: 12 – 24 V DC ±15% Output: 1 opto (galvanic isolation – polarity-free) > Max. switching voltage: 30 V AC / 42 V DC > Max. switching current: 100 mA > 1 relay (potential-free contact) > Max. contact voltage: 30 V AC / 42 V DC > Max. contact current: 1 A (resistive) > Max. switching power: 30 W DC / 60 VA AC Power consumption: approx. 2.3 W, peak current = 1 A LED: 1 tri-color LED: detection/output status Optical characteristics (IEC/EN 60825-1): > Wavelength 905 nm; output power < 0.1 mW; CLASS 1 > Wavelength 635 nm; output power < 1 mW; CLASS 2 – visible spot Vibrations: < 2 G Material / Color: Aluminum A380 – black Dimensions: 124 mm × 90 mm × 50 mm without bracket Protection rating: IP66 (IEC/EN 60529) Operating temperature: -30°C to +60°C when powered Humidity: 0–95% non-condensing Standards: EN 12453 (type D) APPLICATIONS ON: Data Sheet Instructions Manual