SLIM37 blindino in alluminio da incasso con pulsantiera e leva di sblocco

SLIM37-IN

Category:

Built-in aluminum security box with push-button panel and release break

Aluminum security box SLIM 37, built-in version with push-button panel and release break.

TECHNICAL FEATURES:
– Small dimensions: 37 x 243h x 33 mm
– Hole 30 x 235 mm
– Built-in
– Standard electrical connection in accordance with 3-way terminal block
– Unlocking option from both outside and inside

 

REQUEST INFORMATION

Related products

  • CREMAGLIERE M4 gamma di cremagliete in plastica e acciacio per cancelli scorrevoli

    CREMAGLIERE M4

    Read more
    Tecnopolymer and steel racks for sliding gates
    CRP500: - Single bar lenght 1mt - 6 mts pack of tecnopolymer rack - N.5 central fixing elements module 4/ screws included (5 screws per meter) - Double sided toothing to make it usable on both sides - No steel core: design and shapes studied to cancel any chance of strain - Maximum capacity 500 kg CRP700: - Single bar lenght 1mt. - 10 mts pack of tecnopolymer rack - N.6 fixing elements module 4 - Maximum capacity 700 kg CRP1200: - Single bar lenght 1mt. - 8 mts pack of tecnopolymer rack - N.6 fixing elements module 4 - Maximum capacity 1200 kg CRM3012: - Single bar lenght 1mt - 4 mts pack of galvanized steel racks (module 4) - With bolts and spacers for wall mounting (to be welded) Datasheet Tecnopolymer racks Datasheet Steel racks  

  • CONTROLGIR

    Read more
    "Parachute" brakes for sloping sliding gates
    The CONTROLGIR line is indispensable for standardization in the presence of sliding gates on a slope ( it is necessary for there to be a rack). In case of unlocking of the automation gear motor, the internal hydraulic circuit (adjustable) has the function of "parachute," that is, to regulate the downward speed throughout the gate's travel. The operating speed should be adjusted just above that of the gearmotor so that it does not interfere with the automation. CONTROLGIR-7 Braking system for sloping sliding gates - maximum slope 3,2° (7 Mn) TECHNICAL DATA M (required resistant moment): 7 Nm Rack pitch: M4 Gate weight: 400 Kg (3920 N) Slope: 3,2° MAX Formula: M [Nm] = P x sinß x 0,032 P = gate weight in Newtons (9.8N=1Kg) sinß = sine of the tilt angle (ß= tilt in degrees) P = 9.8 x 400kg = 3920 Newton M = 3920 Newton x sin 3.2 x 0.032 = 7 Nm   CONTROLGIR-30 Braking system for sloping sliding gateCsO - mNaTxRimOuLmG IsRlo-p3e0 1 (33,90°N (3m0 )Nm) TECHNICAL DATA M (required resistant moment): 30 Nm Rack pitch: M4 Gate weight: 400 Kg (3920 N) Slope: 13,9° MAX Formula: M [Nm] = P x sinß x 0,032 P = gate weight in Newtons (9.8N=1Kg) sinß = sine of the tilt angle (ß= tilt in degrees) P = 9.8 x 400kg = 3920 Newton M = 3920 Newton x sin 13.9 x 0.032 = 30 Nm Data Sheet
  • BATTERIE di ricambio

    BATTERIES

    Read more
    Range of spare batteries
    A wide range of spare BATTERIES for radio systems. Products available: - CR2032 3V ("Maxell"), battery for radio control EGO - BATT3.6V, 3.6V lithium battery for RadioBand 3 - BATT1.5V 1,5V AA alkaline battery for RadioBand1G and Sensitive safety edges - CR2 3V lithium battery for EGO-KODE brand "Panasonic" - ALK12V, Alkaline 12V battery for GP23AE transmitters - CR2, 3V lithium battery ("Panasonic") for keyboard EGO-KODE - CR2450 3V battery for SIX
     

  • SMALL53

    Read more
    Wall-mounted selector switch with break release
    TECHNICAL DATA - Break release with hexagonal key - Interchangeable cylinder made in Italy - Key with European cylinder - Release lever in the keyfob - Metal body - Dimensions: 53x108hx44 mm Data Sheet
Top