CREMAGLIERE M4
Read more
Tecnopolymer and steel racks for sliding gates
CRP500:
- Single bar lenght 1mt
- 6 mts pack of tecnopolymer rack
- N.5 central fixing elements module 4/ screws included
(5 screws per meter)
- Double sided toothing to make it usable on both sides
- No steel core: design and shapes studied to cancel any chance of strain
- Maximum capacity 500 kg
CRP700:
- Single bar lenght 1mt.
- 10 mts pack of tecnopolymer rack
- N.6 fixing elements module 4
- Maximum capacity 700 kg
CRP1200:
- Single bar lenght 1mt.
- 8 mts pack of tecnopolymer rack
- N.6 fixing elements module 4
- Maximum capacity 1200 kg
CRM3012:
- Single bar lenght 1mt
- 4 mts pack of galvanized steel racks (module 4)
- With bolts and spacers for wall mounting (to be welded)
Datasheet Tecnopolymer racks
Datasheet Steel racks
SMALL53-IN
Read more
Flush-mounted selector switch with break release
TECHNICAL DATA
- Flush-mounted on tubular 40x60mm
- Interchangeable cylinder made in Italy
- Break release with hexagonal key
- Dimensions: 57x120hx37 mm
Data Sheet
CONTROLGIR
Read more
"Parachute" brakes for sloping sliding gates
The CONTROLGIR line is indispensable for standardization in the presence of sliding gates on a slope ( it is necessary for there to be a rack). In case of unlocking of the automation gear motor, the internal hydraulic circuit (adjustable) has the function of "parachute," that is, to regulate the downward speed throughout the gate's travel. The operating speed should be adjusted just above that of the gearmotor so that it does not interfere with the automation.
CONTROLGIR-7
Braking system for sloping sliding gates - maximum slope 3,2° (7 Mn)
TECHNICAL DATA
M (required resistant moment): 7 Nm
Rack pitch: M4
Gate weight: 400 Kg (3920 N)
Slope: 3,2° MAX
Formula:
M [Nm] = P x sinß x 0,032
P = gate weight in Newtons (9.8N=1Kg)
sinß = sine of the tilt angle (ß= tilt in degrees)
P = 9.8 x 400kg = 3920 Newton
M = 3920 Newton x sin 3.2 x 0.032 = 7 Nm
CONTROLGIR-30
Braking system for sloping sliding gateCsO - mNaTxRimOuLmG IsRlo-p3e0 1 (33,90°N (3m0 )Nm)
TECHNICAL DATA
M (required resistant moment): 30 Nm
Rack pitch: M4
Gate weight: 400 Kg (3920 N)
Slope: 13,9° MAX
Formula:
M [Nm] = P x sinß x 0,032
P = gate weight in Newtons (9.8N=1Kg)
sinß = sine of the tilt angle (ß= tilt in degrees)
P = 9.8 x 400kg = 3920 Newton
M = 3920 Newton x sin 13.9 x 0.032 = 30 Nm
Data Sheet
Controlgir-7 Instructions manual
Controlgir-30 Instructions manual
FLAT
Read more
Wall-mounted aluminum key switch
FLAT is an aluminum wall-mounted
key selector
TECHNICAL FEATURES:.
- 2 contacts: 16A
- Dimensions: 79x30x79h mm
