UNI-SAVE
Configurazione UNI-SAVE per POLY e ELIOX

UNI-SAVE

Category:

Universal protection module

UNI-SAVE is a universal protection module for opening systems.
It is composed of a modular metal structure that can adapt to different uses. By combining different modules, it can provide the optimal protection for the POLY chain lifter (2 elements) or the ELIOX solar boom (3 elements).

Find out systems for using the protection module: POLY, automatic chain barrier

 

REQUEST INFORMATION

Related products

  • PBOX

    PBOX

    Read more

    Universal plastic box

    Large box, in plastic material, for control units housing. Including cable glands and slot for padlock. Data sheet  
  • SMALL53-IN

    SMALL53-IN

    Read more
    Flush-mounted selector switch with break release
    TECHNICAL DATA - Flush-mounted on tubular 40x60mm - Interchangeable cylinder made in Italy - Break release with hexagonal key - Dimensions: 57x120hx37 mm Data Sheet
  • UNIVERSAL COLUMNS DORICA LINE

    UNIVERSAL COLUMNS DORICA LINE

    Read more

    Universal aluminum columns

    Aluminium columns series designed to provide a strong, durable and practical product for installing photocells, keypads, etc ALUMINIUM COLUMNS WITH TECHNOPOLYMER FIXING BASE   - Dorica 50 Universal aluminium column 52x70x50h mm with fixing base  115x85 mm
    - Dorica 50 CAP     Universal aluminium column 52x70x50h mm with fixing base  115x85 mm, with housing for photocell
    - Dorica 100 Universal aluminium column 52x70x1000h mm with fixing base  115x85 mm
    ALUMINIUM COLUMNS WITH METAL FIXING BASE   - Dorica h120               Universal aluminium column  52x70x1200h mm with fixing base 150x150 mm   For aluminium columns with technopolymer fixing base  a “zero-space fixing base” is available For both aluminium columns with technopolymer fixing base and aluminium columns with metal fixing base the foundation plate (see data sheet) is available.   Here are the plus points of the Dorica line: RESISTANCE As the profile shape is extruded in aluminium, the structure of these columns is very resistant EASY TO WIRE The body column's, being composed of 2 sliding proles, can be opened to facilitate the wiring's cables Data Sheet Instructions Dorica 50 Instructions Dorica 50 CAP Instructions Dorica 100 Instructions Dorica h120
  • CONTROLGIR

    CONTROLGIR

    Read more
    "Parachute" brakes for sloping sliding gates
    The CONTROLGIR line is indispensable for standardization in the presence of sliding gates on a slope ( it is necessary for there to be a rack). In case of unlocking of the automation gear motor, the internal hydraulic circuit (adjustable) has the function of "parachute," that is, to regulate the downward speed throughout the gate's travel. The operating speed should be adjusted just above that of the gearmotor so that it does not interfere with the automation. CONTROLGIR-7 Braking system for sloping sliding gates - maximum slope 3,2° (7 Mn) TECHNICAL DATA M (required resistant moment): 7 Nm Rack pitch: M4 Gate weight: 400 Kg (3920 N) Slope: 3,2° MAX Formula: M [Nm] = P x sinß x 0,032 P = gate weight in Newtons (9.8N=1Kg) sinß = sine of the tilt angle (ß= tilt in degrees) P = 9.8 x 400kg = 3920 Newton M = 3920 Newton x sin 3.2 x 0.032 = 7 Nm   CONTROLGIR-30 Braking system for sloping sliding gateCsO - mNaTxRimOuLmG IsRlo-p3e0 1 (33,90°N (3m0 )Nm) TECHNICAL DATA M (required resistant moment): 30 Nm Rack pitch: M4 Gate weight: 400 Kg (3920 N) Slope: 13,9° MAX Formula: M [Nm] = P x sinß x 0,032 P = gate weight in Newtons (9.8N=1Kg) sinß = sine of the tilt angle (ß= tilt in degrees) P = 9.8 x 400kg = 3920 Newton M = 3920 Newton x sin 13.9 x 0.032 = 30 Nm Data Sheet Controlgir-7 Instructions manual Controlgir-30 Instructions manual  
Top