SW50 fotocellule da incasso intercambiabili con le più diffuse marche sul mercato

SW50

Category:

Pair of built-in photocells

The SW50 are built-in photocells with a 20 mt range. Due to the recessed shape and size, the SW50 photocell is interchangeable with the most popular models on the market.

Technical features:.
Power supply: 12/24 VDC/ac
Power consumption: 35 mA
Relay capacity: 1A – 24V
I.R. wavelength: 950 nm
Range: 20 mt
Modulation frequency: 1500 Hz
Synchronized mode: only when supplied with alternating current
Operating temperature: -20°C, +60°C

  Datasheet (pdf)
  User Manual (pdf)

REQUEST INFORMATION

Related products

  • ACTIVE-RES

    ACTIVE-RES

    Read more

    Resistive wired safety edges

    Easy to install and can be shortened to size, ACTIVE-RES is using conductive technology in a small sensitive edge. The safety device ensures a rapid response to impacts along the entire length of the structure.   Control board for resistive edges: equipped with two channels, ensures continuous system self-checking, which is blocked in the case of faults. Available in protectioncategory 2 PL D (IMQ-certified) Technical features: - Operating temperature: -20°C, +55°C - Degree of protection: IP65    
  • LIGI, barriera protezione infrarossi

    LIGI

    Read more

    Infrared Protection Barriers

    The LIGI infrared barrier is a certified safety device (EN 12978/EN ISO 13849, cat. 2)that avoids impact (CRASHLESS) and allows safety edges to be removed from the door. Its small size (16x16 mm) and the possibility of simple and direct mounting on the porta via through-holes make it suitable for different types of installations and easily applicable in multiple contexts. It is available in two versions: - version A, for fast doors (56 spokes per 2.5 m, one spoke every 45mm) - version C, for all other types of locks/automations (23 spokes for 2.5m, one spoke every 45mm up to the height of 500mm, then one spoke every 180mm) Maximum operational safety: the LIGI model is non responsive to external light, such that even direct radiation does not limit its operation and it is immune to electromagnetic interference (EMC). Modernization of older door systems: The light curtain is perfectly suited for the conversion or modernization of door systems that cannot meet the required maximum closing forces. Smart functions and easy mounting: the required opening angle for safety reasons of ±5° (EN 12978) poses no problem for mounting the LIGI light curtain. Mechanically adjustable adjustment clamps and a software adjustment mode are available for this purpose with the help of the LED display. Certifications: EN 12978 / EN ISO 13849, Cat. 2, PLd / IEC 61496-2 / EN 12445 Ch. 7 / EN 12453 Ch. 5.5.1 / Devices C D and E in unlimited mode (and achieved relevant certification).
  • LZR-P110

    LZR-P110

    Read more

    Laser detector for automatic doors

      The LZR-P110 laser detector ensures the protection of sliding doors, swing doors and revolving doors in accordance with DIN 18650 and EN 16005 standards. - Time-of-flight measurement: immune to ground reflectivity - Free positioning of 2 virtual buttons for opening sliding doors - Three-dimensional protection at the door threshold and near the closing area with 4 high-resolution laser curtains - Integrated heating system and snow and rain protection filter (for outdoor use) Technical features Maximum detection distance: 5×5 m Detection mode: presence Power supply: 10–35 V DC via connector Output: 2 congurable relays (e.g., slow speed and locking for revolving doors, virtual button and safety mode for sliding doors) Protection rating: IP65 Operating temperature: -30°C to +60°C under power Compliance: 2006/95/EC: LVD; 2002/95/EC: RoHS; 2004/108/EC: EMC; 2006/42/EC: MD; EN 12978:2009; EN ISO 13849-1:2008 CAT2, Pl “d”; EN 60529:2001; IEC 60825-1:2007; EN 60950-1:2005; EN 61000-6-2:2005; EN 61000-6-3:2006; IEC 61496-1:2009; EN 61496-3:2008 ESPE Type 2; EN 62061:2005 SIL 2; EN 16005:2012 Chapter 4.6.8; DIN 18650-1:2010 Chapter 5.7.4; BS 7036-1:1996 Chapter 8.1 Data Sheet Instructions Manual  
  • Micro fotocellula micro-p27s, con sincronismo, relè reed

    MICRO P27S

    Read more
    Micro photocell with synchronism and REED relay
    MICRO-P27 is a micro photocell with a miniaturized design that easily fits any fixing space - even the smallest ones, and guarantee a minimal visual impact of the photocell on the automation. The miniaturized design is typical of the MICRO range (Micro-Flash, Micro-Traffic, Micro-RGB). The integrated micro relay with REED technology, and without levers, also ensure a long lifespan and a wider power supply range - compared to traditional relays. Discover the other products of the MICRO range: MICRO-FLASH, lampeggiatore a led da parete; MICRO-TRAFFIC, led traffic light; MICRO-RGB, led signal light - RGB. TECHNICAL FEATURES: - Power supply: 12-24 Vdc/ca - Absorption: 60 mA - Relay: REED TECHNOLOGY - Max door width: 15 m - Relay capacity: 0,5 A - 24 V - Frequency: 1500 Hz - Light: modulated infra-red - Operating temperature: : -20°C, +60°C - Weight (plastic): 12gr [video src="https://www.abexo.tech/wp-content/uploads/2019/10/video_P27_teaser_v_3-1.mp4.mp4"]
     
Top