LZR-I100/LZR-I110
Read more
Security sensor for swing and sliding gates and industrial doors
LZR-i100 and LZR-i110 detectors are based on highly accurate time-of-flight technology, ensuring optimal safety at the threshold and in the proximity of the door, with four laser curtains that define corresponding detection areas.
PERFORMANCE
- Adjustable detection area depth (up to 1 m) depending on installation height
- Certified safety solution for industrial doors: PL “d” / CAT 2 according to EN ISO 13849-1 and type E according to EN 12453
- High level of safety with complete three-dimensional detection in front of the door
- Small object detection
APPLICATIONS
- Safety during door opening and closing with 2 separate detection zones
- Possibility to create 2 virtual buttons for door opening
DESIGNED FOR INDUSTRIAL CONTEXTS
- Filters door vibrations and environmental interference
- Filters door frame deformations caused by wind
- Protection rating IP65
Technical features
LZR-i110 - Maximum detection distance: 5 m × 5 m
LZR-i100 - Maximum detection distance: 9.9 m × 9.9 m
Power supply: 10-35V DC on connector
Output: 2 electronic relays (galvanic isolation –
polarity-free)
Maximum switching voltage: 35 VDC / 24 VAC
Maximum switchable current: 80 mA (resistive)
Dimensions: 125 mm (W) × 93 mm (D) × 70 mm (H)
(mounting bracket +14 mm)
Protection rating: IP65
Operating temperature: -30°C to +60°C under power
Compliance: EMC 2014/30/EU; LVD 2014/35/EU; MD
2006/42/EC; ROHS 2 2011/65/EU; EN 12453 chapter
5.1.1.6, chapter 5.5.1 Safety device E; EN 12978; EN ISO
13849-1 Pl ‘d’/ CAT2; EN 60529; IEC 60825-1; EN
60950-1; EN 61000-6-2; EN 61000-6-3; IEC 61496-1; EN
61496-3 ESPE Type2; EN 62061: 2005 SIL 2; DIN 18650-1
Chapter 5.7.4
Data sheet
Instructions Manual
LZR-S600
Read more
Laser detector for building security
LZR-S600 is a LASER security detector designed to protect property and buildings from theft, intrusion and vandalism. It is a compact, easy-to-install, plug & play solution with a self learning function.
- Ability to detect small objects with a reflectivity factor of 2%
- Does not require illumination of the object to be protected (unlike standard camera systems)
- Effective protection against environmental disturbances (flight time and special software)
Technical features
Maximum detection distance: from 10×10 to 25×25 (4 planes in height, width, and depth)
Detection mode: motion and presence
Power supply: 10–35 V DC via connector
Output: 2 independent relays con gurable as
pre-alarm/alarm, day/night, anti-vandalism
Protection rating: IP65
Operating temperature: -30°C to +60°C under power
Compliance: 2006/95/EC: LVD; 2002/95/EC: RoHS;
2004/108/EC: EMC ; EN 60529:2001; IEC 60825 - 1: 2007
Laser Class 1 & 3R ; EN 61000-6-2: 2005 EMC - Industrial
level ; EN 61000-6-3: 2006 EMC - Commercial level
Data Sheet
Instructions Manual
LZR-P110
Read more
Laser detector for automatic doors
The LZR-P110 laser detector ensures the protection of sliding doors, swing doors and revolving doors in accordance with DIN 18650 and EN 16005 standards.
- Time-of-flight measurement: immune to ground reflectivity
- Free positioning of 2 virtual buttons for opening sliding doors
- Three-dimensional protection at the door threshold and near the closing area with 4 high-resolution laser curtains
- Integrated heating system and snow and rain protection filter (for outdoor use)
Technical features
Maximum detection distance: 5×5 m
Detection mode: presence
Power supply: 10–35 V DC via connector
Output: 2 con gurable relays (e.g., slow speed and locking for revolving doors, virtual button and safety mode for sliding doors)
Protection rating: IP65
Operating temperature: -30°C to +60°C under power
Compliance: 2006/95/EC: LVD; 2002/95/EC: RoHS;
2004/108/EC: EMC; 2006/42/EC: MD; EN 12978:2009;
EN ISO 13849-1:2008 CAT2, Pl “d”; EN 60529:2001; IEC
60825-1:2007; EN 60950-1:2005; EN 61000-6-2:2005;
EN 61000-6-3:2006; IEC 61496-1:2009; EN
61496-3:2008 ESPE Type 2; EN 62061:2005 SIL 2; EN
16005:2012 Chapter 4.6.8; DIN 18650-1:2010
Chapter 5.7.4; BS 7036-1:1996 Chapter 8.1
Data Sheet
Instructions Manual
ARGOS
Read more
Compact synchronised photocells
The ARGOS photocell is a barrier sensor designed for flush mounting directly into structural profiles, ensuring discreet and secure installation. Advanced technology ensures reliable detection, resistance to environmental conditions, and optimal integration into any type of structure.
-Synchronised (2 pairs)
-Wear-free semiconductor relays
-Clogging indicator
-Insensitive to stray light
-IP67, electronics fully encapsulated in resin
-Pre-wired: cable length 4m
Technical specifications:
Operating voltage:
10÷40 Vdc / 10÷30 Vac
Door width: 1÷20 m (pre-set)
Output: semi-conductor output
NC contact: potential-free/test input
LED indicators:
Transmitter: green LED
Receiver: red LED
Connection:
Transmitter: 3x0.25 mm²
Receiver: 5x0.25 mm²
Protection degree: IP67
fully encapsulated
Data Sheet
