INFRA2 Fotocellule con amplificatore infrarossi

INFRA2

Category:

Infrared Barrier

INFRA2 are miniaturised self-aligning modulated infrared photocell barriers with a range of 6 m at full power and 3 m at half power.
They consist of:
– amplifier card for two pairs of photocells with self-test function (fault signalling relay output) and dual relay output with contacts in series;
– emitter/receiver pair complete with 8 m shielded cables;

TECHNICAL DATA

– Fixed optics Ø10,6mm
– Power supply voltage: 12-24V
AC +/-10% – 12-24V DC -5/+30%

Data Sheet
Instruction Manual

REQUEST INFORMATION

Related products

  • BLINK

    Read more
    Universal LED flasher, multi-voltage
    BLINK makes your installation simple and elegant, providing low consumption and excellent visibility thanks to the built-in 6-LED Retrofit board. It is equipped with a wall mounting bracket and thanks to the jumper you can select the type of flashing (steady or flashing light). All these features, together with the multi-voltage (12/24/230V) make the BLINK flasher perfect for any type of installation, allowing ample energy savings. The BLINK flasher is also available with a white lens - BLINKW Find out universal multi-voltage led boards: Retrofit (9 leds, low consumption) and MEGAretrofit, for megavisibility. Find out the high luminous efficiency version: MEGA-BLINK, 18 leds and IP67 buzzer built into the base.
  • Traffic colonnetta - semaforo rosso/verde su colonna alluminio anodizzato h145 cm

    TRAFFIC COLUMN

    Read more
    Anodized aluminium column (12 x 2 x 149h cm) with a traffic light-two lights, red and green lens.
      TRAFFIC COLUMN, the ideal solution for installations that do not require wall fixing: the two lenses -red and green- of the Traffic traffic lights range guarantee a high luminous efficiency, and the anodized aluminum of the column makes this product versatile and practical. This solution combines the quality of Traffic 1 in red lens and green lens (9 high brightness LEDs for each lens and metal structure) to the practicality of the column: it can be easily positioned where needed, thanks to the practical support base. Discover the other traffic lights of the TRAFFIC range: TRAFFIC 1 (red/yellow/green), TRAFFIC 2 (red, green) and TRAFFIC 3 (three lights: red, yellow, green).
  • HR100-CT/BL

    HR100-CT/BL

    Read more
    Advanced unidirectional detection sensor with monitored security system and exclusive "Door Learn" function
    Extraordinary state-of-the-art sensor capable of capable of ensuring the activation of doors pedestrian doors and unprecedented security at mounting heights no to 3m. TECHNICAL DATA - Technology: active infrared reflection - Supply voltage: 12-24 Vdc/Vac ± 10% - Current consumption: 60 mA (24 VDC) - Installation height: adjustable 2000-3000mm - Temperature range: -20°C to +60°C - Output: Open collector 7.5mA (Min) load resistor - Degree of protection: IP54 - Dimensions: 230 x 70 x 44 mm Data Sheet
  • micro semaforo a led per varchi pedonali

    MICRO TRAFFIC

    Read more
    LED traffic lights for pedestrian crossings
    MICRO-TRAFFIC is a LED traffic light ideal for signalling the state of an alarm system or the state of a door in an access control system, without ruining the elegance of the automation. Thanks to its compact size and the tipical design of the MICRO line, it can be easily applied either on the wall or in the door jambs without affecting (ruin, dirty, etc.) the elegance of the access points. The signal will be discreet, but still perfectly visible when working, thanks to LED technology (the same as VOLT and ALF products). The steel/glass colours of the materials used match both the traditional doors and door frames in aluminium (or other material). The back gasket, included in all of the products of the MICRO line, will guarantee a better grip on every type of wall and a better isolation. Size: 70 x 27 x 16 mm Discover the other products of the MICRO range: MICRO-P27S, micro photocell; MICRO-FLASH, micro flashing light. Datasheet   User Manual (pdf)
Top