EGO PLUS
Read more
Universal 4-button/channel radio transmitter
Universal 4-channel multi-frequency transmitter (433.92MHz to 868.35MHz).
Manufactured entirely in Italy, it is capable of learning fixed codes and rolling codes.
Each key can be independently programmed so that 4 different transmitters can be stored in a single device 4 different transmitters.
It also has the ability to generate new unique codes that can be memorised on the receivers.
Simplified copy: LEDs indicate how to complete the programming depending on the model of the remote control to be copied Ego Plus uses a 3V battery type CR2032.
Datasheet
Istructions manual
Instructions manual v 1.1
Full compatibility list FIXED CODE Transmitters
EGO64
Read more
Universal 4-channel multi-frequency transmitter (433.92MHz to 868.35MHz)
The EGO64 transmitter is suitable for unifying or replacing all discontinued radio remote controls.
In addition to this, it can replace, by emulating them, almost all radio control models currently on the market.
The self-learning reproducible frequency spectrum ranges from 433Mhz to 868 Mhz. (excluding quartz frequencies that range from 28.785Mhz to 40.600Mhz).
In addition to frequency, EGO64 is able to recognise the type of coding present in the original (whether fixed or rolling-code) and replicate it accurately and consistently.
It can store up to 4 transmitters with different frequencies and codes (one for each key).
CODE GENERATOR FUNCTION
In the absence of the original or with a damaged original Ego64 already has in memory the original model numbers indicated in the instructions.
EGO433
Read more
4 Channels Transmitter with 433,92MHz frequency
(keyless emulator of fixed and rolling codes – HCS standard)
Self-learning 433,92 Mhz 4 channels transmitter. Produced entirely in Italy, EGO433 can duplicate fixed code and keyless HCS transmitters. Each channel can replicate a different transmitter and given a compatible receiver EGO433 is able to replace even a broken one thanks to its code-generator feature.
Powered by a 3 V CR2032 battery, EGO433 signals the user before the battery is empty changing the behavior of flashing led during common usage.
Furthermore EGO433 prevents accidental battery drains by stopping the transmission after 20 seconds of continuous pressing.
Discover the other universal products: EGO universal multi-frequency transmitter
, COPY-MINI universal self-learning receiver (2 channels),
COPY-ONE universal self-learning receiver (4 channels),
EGO-KODE universal multi-frequency radio keypad.
EGO-KODE
Read more
EGO-KODE: “Universal” multi-frequency radio keypad
EGO-KODE is a multi-frequency universal radio keypad, compatible with any receiver you already have in your automation system. Without any wiring, it allows you to open your gateway with a simple PIN code. EGO-KODE is user-friendly, safe and accessible: you will be able to get in easily and freely without a key.
EGO-KODE can be battery-powered or by using the two cables that were previously needed for your old key-switch.
Technical features:
- multi-frequency: from 433,92 Mhz to 868,35 Mhz
- channels: 4
- entry mode: PIN code (1-8 digits)
- power supply: 12-24 VAC, 12-24 VDC;
max 100mA / CR2 lithium battery included (3V)
- tamper: yes
- degree of protection: IP65
