VOLT RETROFIT
Read more
Universal LED replacement board for flashing lights
By replacing the old incandescent bulb with the
RETROFIT board , hight
energy savings (circa 93%) thanks to the
6 LEDs with high luminous efficiency and
low power consumption, with power consumption < 2 watts. The Retrofit board also ensures a longer life of the flasher: in fact, the estimated life of the LEDs is about 50 times longer than traditional incandescent lamps.
Installation is easy thanks to the universal mounting base that is compatible with all popular brands of flasher, and the
universal power supply, 12V - 24V and 230V, allows its wide versatility in different installations.
Thanks to jumper JP1 it is possible to
select the type of light, steady or flashing.
Buzzer (beeper) optional.
For even more brightness,
find out MEGAretrofit, Retrofit' evolution : 18 led placed on the 4 sides.
POWERLED
Read more
LED flasher battery-operated and with motion sensor
Motion sensor with adjustable sensitivity. It mounts directly on
the lock (shutter, sectional door, gate) recessed or wall-mounted.
TECHNICAL DATA
- Without li and radio connection
- Illuminates the moving edge
- Power supply: no.3 AA LR 1.5V batteries
- Dimensions: 230x30x24 (prof) mm
Data Sheet
Instruction manual
RM620
Read more
Microwave radar for opening industrial automatic doors
The RM620 Microwave Radar can be installed at a height of 3.5 to 6 meters, with a min. detection speed of 0.1 m/s and an adjustable range of 1-10 meters.
With planar technology, high resolution of coverage area and motion direction recognition, it is extremely versatile and can be used in multiple installations.
Its programmable functions and the ability to orient it vertically (0-60°) and horizontally (+/- 45°) make it easy to install.
It is developed in planar and X-band technology and can be adjusted in one-way (independently detects both directions of motion, forward or backward) or bidirectional (detects both directions of motion).
TECHNICAL FEATURES:.
- Power supply: 12/24 Vac / 12-30 Vdc
- Power consumption: 50 mA max
- Operating frequency: 9.90 GHz
- Relay contact: 1A - 24 Vac/dc
- Relay control time: 1-6 sec adjustable
- Maximum consumption: 40mA
- Degree of protection: IP65
INFRA2
Read more
Infrared Barrier
INFRA2 are miniaturised self-aligning modulated infrared photocell barriers with a range of 6 m at full power and 3 m at half power.
They consist of:
- amplifier card for two pairs of photocells with self-test function (fault signalling relay output) and dual relay output with contacts in series;
- emitter/receiver pair complete with 8 m shielded cables;
TECHNICAL DATA
- Fixed optics Ø10,6mm
- Power supply voltage: 12-24V
AC +/-10% - 12-24V DC -5/+30%
Data Sheet
Instruction Manual
