AOS124

AOS124

Category:

OSE signal converter for LIGI07

The AOS124 signal converter allows a LIGI light curtain with OSE output to be adapted to control panel that do not have this technology.
The OSE signal is converted into a relay signal (potential-free).

Advantages
1 input for 1 OSE device
1 relay output + test input
NO or NC relay output
LED indicators for input and output status
Category 2 device, compliant
with ISO13849-1 standard

Technical specifications
Power supply 19…35 VCC o 19…30 VCA
Input 1x OSE signal
Output Relay/TEST inputs
Light Indicator Yellow LED
Security Cat. 2, ISO 13849-1
Protection degree IP65

Data Sheet

REQUEST INFORMATION

Related products

  • LIGI 07

    LIGI 07

    Read more

    Photoelectric immaterial barriers for sectional and high-speed doors

    As with all other Witt products, the LIGI 07 barrier has been specifically designed to operate in the harsh conditions typical of industrial gates. The super-compact, integrated design measures just 12x15mm, offering perfect protection against the humidity and vibrations typical of automatic door installations. The LIGI 07 barrier sets new standards for the future with state-of-theart electronics and intelligent firmware. It is compatible with all standard control units for automation and can be used with almost all existing systems. Advantages Very compact design Long range Integrated electronics Adaptable to different types of installations For doors up to 10 m wide Can be installed in the door jamb with the BLANKING feature (beam cancellation) Extremely robust, all components are integrated into a single metal body Pre-drilled with front holes for direct mounting Available with OSE output or solid-state relay (SSR) Electronic self-alignment Integrated diagnostics Highly resistant to external optical interference Compact size: only 12x15mm Technical specifications Passage width 1,6 - 10 m Operating voltage 10 - 30 Vcc Current consumption Transmitter: approx. 30 mA (24 Vdc) (24 Vdc) Receiver: approx. 20 mA (24 Vdc) Power consumption approx 1,2 W Optical emission modulated infrared OSE output Approximately 950 Hz, alternating signal, 4 V 20 mA, short-circuit protection and protected against polarity reversal Maximum leakage current max 30 uA Pull-down resistance 220 ohm Output SSR solid state relay 100 mA, protected circuits Intrinsic capacity 220 nF, max. 30 Vcc, max. 21 Vca, Rs on < 35 ohm Response time < 100ms Reboot time < 400 ms Environment lighting > 100 klux External material Fully resin-coated aluminium profile Connector 6-pin M8 plug Certification IP67, EN60529 Operating temperature -20°, +60°C Storage temperature -30°, +70°C Available versions: -OSE output with blanking function (gradual beam blanking during door downward movement) -SSR output (solid state relay) selectable NC/NO, with blanking function LIGI 07 can ONLY be installed on high-speed doors  
  • LOW POWER SIGNAL

    LOW POWER SIGNAL

    Read more

    Optics for sensor profile

    Extremely low power consumption Integrated diagnostic system with visual display LED indicator for switching status OSE output signal IP 67, fully protected electronics LOW-POWER-SIGNAL automatically selects the output frequency depending on the connected device: safety signals transmitted to a battery-powered radio link will therefore have a lower frequency than if they were sent directly to the control panel via a spiral cable. This increases battery life and ensures compatibility with most control panels on the market. Technical specifications Power supply 3...27 VCC Maximum door width 1...12 m Output OSE signal Warning lights Yellow LED indicator Connections 3x0,14 mm² Protection degree IP67, electronics encapsulated in epoxy resin Data Sheet
  • LIGI, barriera protezione infrarossi

    LIGI

    Read more

    Infrared Protection Barriers

    The LIGI infrared barrier is a certified safety device (EN 12978/EN ISO 13849, cat. 2)that avoids impact (CRASHLESS) and allows safety edges to be removed from the door. Its small size (16x16 mm) and the possibility of simple and direct mounting on the porta via through-holes make it suitable for different types of installations and easily applicable in multiple contexts. It is available in two versions: - version A, for fast doors (56 spokes per 2.5 m, one spoke every 45mm) - version C, for all other types of locks/automations (23 spokes for 2.5m, one spoke every 45mm up to the height of 500mm, then one spoke every 180mm) Maximum operational safety: the LIGI model is non responsive to external light, such that even direct radiation does not limit its operation and it is immune to electromagnetic interference (EMC). Modernization of older door systems: The light curtain is perfectly suited for the conversion or modernization of door systems that cannot meet the required maximum closing forces. Smart functions and easy mounting: the required opening angle for safety reasons of ±5° (EN 12978) poses no problem for mounting the LIGI light curtain. Mechanically adjustable adjustment clamps and a software adjustment mode are available for this purpose with the help of the LED display. Certifications: EN 12978 / EN ISO 13849, Cat. 2, PLd / IEC 61496-2 / EN 12445 Ch. 7 / EN 12453 Ch. 5.5.1 / Devices C D and E in unlimited mode (and achieved relevant certification).
  • FLATSCAN IP66

    FLATSCAN IP66

    Read more

    Laser detector for gates and industrial doors

    FLATSCAN IP66 is a compact, single curtain sensor composed of 400 beams, based on LASER technology, designed for use on automatic industrial doors and swing gates. The high accuracy of laser technology ensures precise detection of people and vehicles within a range of 5.5 m x 5.5 m, in indoor and outdoor environments. The robust metal housing with IP66 protection rating makes the sensor suitable for installations in industrial environments and outdoor applications. Technical characteristics: Technology: LASER scanner, time-of-flight measurement Mounting height: from 2.5 m to 5.5 m Maximum detection area: Max. 5.5 m × 5.5 m (4 m @ 5% reflectivity) Detection types: presence Radar field of view: 90° Tilt angle: ±3° (with bracket) Power supply: 12 – 24 V DC ±15% Output: 1 opto (galvanic isolation – polarity-free) > Max. switching voltage: 30 V AC / 42 V DC > Max. switching current: 100 mA > 1 relay (potential-free contact) > Max. contact voltage: 30 V AC / 42 V DC > Max. contact current: 1 A (resistive) > Max. switching power: 30 W DC / 60 VA AC Power consumption: approx. 2.3 W, peak current = 1 A LED: 1 tri-color LED: detection/output status Optical characteristics (IEC/EN 60825-1): > Wavelength 905 nm; output power < 0.1 mW; CLASS 1 > Wavelength 635 nm; output power < 1 mW; CLASS 2 – visible spot Vibrations: < 2 G Material / Color: Aluminum A380 – black Dimensions: 124 mm × 90 mm × 50 mm without bracket Protection rating: IP66 (IEC/EN 60529) Operating temperature: -30°C to +60°C when powered Humidity: 0–95% non-condensing Standards: EN 12453 (type D) APPLICATIONS ON: Data Sheet Instructions Manual  
Top