Flashing lights and linear led indicators

Showing all 11 results

  • COBLED

    Read more

    Linear LED wall indicator

    The 24V COB LED linear signal lights with fixedyellow light offer a uniform and powerful lighting solution. Suitable for signaling obstacles or large doors and gates opening, where a traditional flashing light would be too small or insufficiently bright. The standard version of Cobled is a FIXED light signal, but with  an optional card it is possible  to convert the cobled into a flashing light. Technical data: Lamp type: COB LED Light colour: yellow Power supply: 24Vdc Power: 10 W Degree of protection: IP55 Wiring: 2-wire cable side output Profile: dark grey aluminium Fixing: with 4 springs included COBLED 1000 Power: 10 W Dimensions: 17x9x1000 mm COBLED 2000 Power: 20 W Dimensions: 17x9x2000 mm COB LED advantages: Uniform light: One of the main advantages is the production of a continuous, homogenous light without the individual light spots visible in conventional LED strip. This is particularly useful in applications where light is reflected or where uniform illumination of a surface is required. High luminous intensity: Due to chip density, COB LEDs can produce a high quantity of light from a small surface area. Energy efficiency: They generally provide a good lumen/watt ratio, which means more light with less energy consumption. Compact design: The integration of several chips in a single module allows for smaller and more compact luminaires. Good heat dissipation: The design with a good thermal substrate helps manage the heat generated, improving adaptability and durability. Wide emission angle: COB LEDs can often offer a wider emission angle, ideal for illuminating larger areas. Less light loss: The absence of individual lenses or casings for each chip can reduce light loss.  
  • FLAT WHITE

    Read more

    9 LED white light indicator for gates and doors -  high brightness

    FLAT WHITE is a fixed white LED indicator designed to provide clear and highly visible light signalling at automatic gates, transit areas or access points. Equipped with 9 high-brightness LEDs, it guarantees intense light, ideal for increasing safety in industrial, residential, condominium or commercial contexts. The UNI EN 12453:2017 standard for automatic gates, while not specifically requiring constant lighting, emphasises the importance of safety and visibility during operation. Adequate lighting helps to make the gate clearly visible, reducing the risk of accidents, especially in low light conditions. Compact and durable, it is constructed with a metal frame and stainless steel screws, and is suitable for outdoor use thanks to its IP65 protection rating. It can be powered directly at low voltage or via the dedicated TRAFFIC DRIVER converter for 230 Vac systems. The long life of the LEDs – up to 50,000 hours of operation – and low energy consumption make it an efficient and reliable solution. FLAT WHITE is the ideal solution for those looking for a discreet but powerful illuminator, designed to withstand the test of time and operate in harsh environmental conditions, improving visibility and safety in access areas. Technical data:
    • Power supply: • 12÷27 Vac | 3,5W • 12÷39 Vdc | 3,5W • 230 Vac with TRAFFIC DRIVER converter
    • Brightness: 54 lumen
    • Sorgente luminosa: 9 LED bianchi ad alta intensità
    • Degree of protection: IP65
    • Structure: metal structure with stainless steel screws
    • Dimensions: 98×98×27 mm
    • Estimated lifespan: 50.000 hours
    • Operating Temperature: -20°C ÷ +60°C
    - Istructions
  • NEONFLEX10

    Read more

    Silicone LED light diffuser with white light and aluminium profile

    NEONFLEX10 is a flexible LED strip with fixed white light, designed to ensure maximum visibility in automation, access control and signalling systems. Ideal for highlighting the opening or presence of doors, gates and driveways, it comes complete with an aluminium profile for quick, secure and durable installation. The light source uses high-density LED technology, capable of generating continuous and uniform lighting without the visible light points typical of traditional strips, thus ensuring a diffused and extremely clean effect. It is available in three lengths – 1000 mm, 1500 mm and 2000 mm – and can be shortened to size thanks to the integrated cutting notches, which facilitate adaptation during installation. Its anti-UV treatment, solvent resistance and IP67 protection rating make it perfect for outdoor applications, even in harsh conditions with dust, rain, salt water or chemicals.   Technical features: Power supply: 24 Vdc Power: 10 W/m Brightness: 486 lm Light temperature: 3000 K Degree of protection: IP67 Dimensions: 30 x 13 x 1000 mm /30 x 13 x 1500 mm /30 x 13 x 2000 mm Profile: Aluminium Wiring: Cable length 100 cm Operating temperature: -25°C, +60°C  
  • MICRO FLASH

    Read more
    Wall flashing LED
    MICRO FLASH is the innovative led flashing light designed to make the automation of garage doors better looking and high tech looking. In the early years of spread of automatic gates the cost to have them was very high. The automation was economically for the few and the flashing light, installed in evidence, in addition to its role of signaller, was used as a status symbol: large and very showy. Today the gate automation is affordable for many and the role of the flashing light has changed. MICRO-FLASH is a small flashing light perfectly integrable in the system because of its size, but at the same time gives the maximum visibility during movement to signal the danger. Discover the other universal led flashing lamps: BLINK (available with yellow and white lens), ALF6 (wall-mounting, available with yellow and white lens),  VOLT. Discover our spare universal led boards: RETROFIT and MEGARETROFIT, if you need megavisibility.  
  • POWERLED

    POWERLED

    Read more
    LED flasher battery-operated and with motion sensor
    Motion sensor with adjustable sensitivity. It mounts directly on the lock (shutter, sectional door, gate) recessed or wall-mounted. TECHNICAL DATA - Without li and radio connection - Illuminates the moving edge - Power supply: no.3 AA LR 1.5V batteries - Dimensions: 230x30x24 (prof) mm   Data Sheet Instruction manual
  • Scheda universale di ricambio LED per lampeggianti

    VOLT RETROFIT

    Read more
    Universal LED replacement board for flashing lights
    By replacing the old incandescent bulb with the RETROFIT board , hight energy savings (circa 93%) thanks to the 6 LEDs with high luminous efficiency and low power consumption, with power consumption < 2 watts. The Retrofit board also ensures a longer life of the flasher: in fact, the estimated life of the LEDs is about 50 times longer than traditional incandescent lamps. Installation is easy thanks to the universal mounting base that is compatible with all popular brands of flasher, and the universal power supply, 12V - 24V and 230V, allows its wide versatility in different installations. Thanks to jumper JP1 it is possible to select the type of light, steady or flashing. Buzzer (beeper) optional. For even more brightness, find out MEGAretrofit, Retrofit' evolution : 18 led placed on the 4 sides.  
  • MEGARETROFIT

    Read more
    Universal spare board with high luminous efficacy, 18 leds
    Thanks to our long-term experience with the Retrofit spare board and to our constant research of electronical components, we designed a universal failsafe board: thanks to its 18 leds laid out all around, it guarantees MEGA-visibility to your flashing lamp! The wiring is made by 2 terminals from 12V to 230V ac and cc: thanks to the jumpers you can select the current and the light mode, steady or flashing. Its 18 LEDs laid out all around ensure excellent visibility to your system and high luminous efficacy. The optional buzzer can be placed outside the ashing lamp and the antenna is suitable for 433 and 868 Mhz frequencies.  
  • BLINK

    Read more
    Universal LED flasher, multi-voltage
    BLINK makes your installation simple and elegant, providing low consumption and excellent visibility thanks to the built-in 6-LED Retrofit board. It is equipped with a wall mounting bracket and thanks to the jumper you can select the type of flashing (steady or flashing light). All these features, together with the multi-voltage (12/24/230V) make the BLINK flasher perfect for any type of installation, allowing ample energy savings. The BLINK flasher is also available with a white lens - BLINKW Find out universal multi-voltage led boards: Retrofit (9 leds, low consumption) and MEGAretrofit, for megavisibility. Find out the high luminous efficiency version: MEGA-BLINK, 18 leds and IP67 buzzer built into the base.
  • MEGA-BLINK lampeggiatore universale ad alta efficienza luminosa con buzzer integrato - 18 led su tutti e quattro i lati

    MEGA-BLINK

    Read more
    Universal LED flashing light, multitension, with high luminous efficacy and integrated buzzer
      MEGA-BLINK is a universal multitension LED flashing light ideal to complete your system: the IP67 integrated buzzer and the internal led board equipped with 18 leds, laid out all around, ensure an excellent visual and acoustic activity when the automation is moving. This flashing lamp is equipped with wall-mounting bracket and thanks to its jumper you can select the type of light (steady or flashing light). The internal electronic board (MEGA-RETROFIT) guarantees mega-visibility and high luminous efficacy, thanks to its 18 leds laid out all around: 6 on the front, 6 on the rear and 3 per each side. The MEGA-BLINK flashing lamp is also available without integrated buzzer. Discover the two versions of the universal led multitension board: Retrofit (9 led, low consumption) and MEGAretrofit, mega-visibility - used in MEGA-BLINK. Discover the other version of this flashing lamp: BLINK, 9 leds flashing lamp, low consumption.  
  • lampeggiatore universale multitensione volt a led

    VOLT

    Read more
    Universal LED flashing light
    6-LED Flashing light with high efficiency and low power consumption. VOLT consumes about 93% less energy than traditional indicators and the LEDs lifespan is about 50 times longer than traditional incandescent lamps. The flashing light is easy to install and has the IP65 degree of protection. The lamp offers the possibility to select between flash, fixed or alternating lights using a jumper. Universal power supply, 12V – 24V and 230V. The high quality of the product allows us to offer a 5 year warranty. Also available in white. Buzzer optional. Discover the other universal led flashing lamps: BLINK (available with yellow and white lens), ALF6 (wall-mounting, available with yellow and white lens) and MICRO FLASH. Discover our spare universal led boards: RETROFIT and MEGARETROFIT, if you need megavisibility.  
  • Lampeggiatore a LED ALF6

    ALF6

    Read more
    Wall-mounted universal LED flashing lamp, multiple-voltage
     
    The ALF wall-mounted LED flashing lamp is easy to install and attractive. Its multiple-voltage power supply (12/24/230V) makes it suitable for use with all control units, thanks to its flash selection jumper.The LUX version relies on the control panel accessory power supply to activate a nighttime courtesy light (1 LED) thanks to an integrated twilight sensor. LUX turns into a courtesy light by turning on all 4 high-efficiency LEDs and disabling the flash. Discover the other universal led flashing lamps: <ahref="https://www.abexo.tech/en/prodotto/blink/">BLINK (availble with yellow and white lens), MICROFLASH and  VOLT. Discover our spare universal led boards: RETROFIT and MEGARETROFIT, if you need megavisibility.  
Top