EGO-KODE
Read more
EGO-KODE: “Universal” multi-frequency radio keypad
EGO-KODE is a multi-frequency universal radio keypad, compatible with any receiver you already have in your automation system. Without any wiring, it allows you to open your gateway with a simple PIN code. EGO-KODE is user-friendly, safe and accessible: you will be able to get in easily and freely without a key.
EGO-KODE can be battery-powered or by using the two cables that were previously needed for your old key-switch.
Technical features:
- multi-frequency: from 433,92 Mhz to 868,35 Mhz
- channels: 4
- entry mode: PIN code (1-8 digits)
- power supply: 12-24 VAC, 12-24 VDC;
max 100mA / CR2 lithium battery included (3V)
- tamper: yes
- degree of protection: IP65
SH4
Read more
4-channel keypad wih 433,92MHz frequency SH line control units
Self-learning, 4-channel keypad with 433,92 Mhz frequency. Entirely made in Italy, it transmits a HCS cod with AB techno key. The batteries are n.2 type CR2016, and the keypad informs the owner of its battery status by changing its blinking lights.
Data Sheet
COPY-MULTI
Read more
Universal" multi-frequency self-learning receiver - 2 channels
The COPY-MULTI universal receiver allows extreme versatility in new and existing installations.
Its flexibility lies in being able to store in a single receiver remote controls of different origins, with fixed and
rolling. The universal receiver thus makes it possible, in most cases, to unify installations or replace non-functional receivers without replacing the radio controls.
without replacing existing remote controls and thus guaranteeing better continuity of service and less inconvenience to users.
inconvenience for users.
Technical characteristics:
2 Channels (NO outputs)
Power supply: 12 VAC to 24 VAC - 12 VDC to 24 VDC
Relay contacts: n.2: 2A 120VAC / 2A 24 VDC
Frequency: 433.92 to 868.35 MHz
Storable codes: 200
Operating temperature -20°C, +60°C
User Manual
Product video rendering
Datasheet
EGO PLUS
Read more
Universal 4-button/channel radio transmitter
Universal 4-channel multi-frequency transmitter (433.92MHz to 868.35MHz).
Manufactured entirely in Italy, it is capable of learning fixed codes and rolling codes.
Each key can be independently programmed so that 4 different transmitters can be stored in a single device 4 different transmitters.
It also has the ability to generate new unique codes that can be memorised on the receivers.
Simplified copy: LEDs indicate how to complete the programming depending on the model of the remote control to be copied Ego Plus uses a 3V battery type CR2032.
Datasheet
Istructions manual
Instructions manual v 1.1
Full compatibility list FIXED CODE Transmitters
